Standard
Flue Pipe (B VENT) Is Only Required To Vent This Water Heater. B VENT Is Easily
Obtained At Your Local Plumbing, Heating Supply Or Home Center.
Turn on your hot
water faucet and water is heated instantly as it flows through the coil. Paloma's
burners shut off automatically as soon as you turn off the faucet. There is
NO standby heat loss.
When the water flows through the water controls and the high efficient heat
exchanger, the main burner is activated by the water flow and the water pressure
differential. The Paloma water heater heats water instantaneously as it flows
and only when it flows. Therefore, the temperature remains the same. There is
no tank with reserve water waiting to be heated. Dial setting allows you to
choose anywhere between the 60ºF and 100ºF temperature rise (Model
PH-12M & PH-24M).
Suitable for Residential Use Just one Paloma supplies all the hot water you
need in your home for shower, bath, dishwasher, laundry, etc.... Heavy simultaneous
use may reduce the flow at a particular faucet.
Trying
to understand when to select a Paloma Legacy Tankless instead of a solution
from the contemporary Digital Tankless line?
Legacy Tankless have all been proven with years of
use, and are ready to stand up to the rigors of difficult conditions where a
Digital Tankless might not dare to tread.
If you can say YES to any of the following, you too
may be a candidate for ownership of a Paloma Legacy Tankless:
|
You still
work on your 1970 Beetle because it “gets good gas mileage.”
|
|
Dylan lost his creds when he played electric at Newport in ’65.
|
|
The internet
is convenient but not nearly as useful as the Whole Earth Catalog.
|
More
prosaically, the Legacy can be the right solution if you want to use your tankless
under any of the following conditions:
|
Low water
pressure, from a well, for example
|
|
No electricity, or you want it to stand up to power outages.
|
|
Your installation
will involve a long vertical vent run (unlike Digital Tankless, the Legacy
are atmospherically-vented using less expensive, galvanized “B”
vent).
|
|
Extensive
diagnostics and error display
|
Legacy
Tankless come in three sizes, with the Legacy 24 the optimal model for whole-house
applications.
Expect winter performance of 1~2 full showers, depending on your location, with
1-hour bath filling capability over 190 gallons.
The
Legacy 24 features:
|
Mechanical
modulation to keep output temperatures consistent, even if you change
the flow at the tap.
|
|
A knob controller used to set water temperature rise from 60~100o
above inlet temperature.
|
|
Full performance
at water pressure of just 12.9 psi. Minimum working pressure of
just 2.4 psi.
|
|
A built-in
Piezo igniter to easily light the standing pilot (so you can extinguish
the pilot light when not in use to achieve greater overall energy efficiency)
|
| A magnetic
safety valve to stop gas flow when the pilot is extinguished. |
|
Optional
freeze protection kit to protect the unit against freezing conditions
down to -5o F.
|
The
Paloma Legacy 24 is an excellent whole house and commercial hot water solution
that will work in tough conditions where other tankless dare not go.
Modulating
Unit
Turn on your hot water faucet and water is heated
instantly as it flows through the heating coils. Paloma's burners shut off automatically
as soon as you turn on the fucet. The Paloma modulating control automatically
adjusts the flame to the water flow you select. Small water demand equals low
flame. Large water demand equals high flame.
Paloma produces hot water only when and as much as
you need. That's why you can save energy and money.
High Technology and Quality Design
Wall-mounted Paloma tankless water heaters are
built to perform efficiently with very little maintenance. First class materials
include a copper heat exchanger and combustion chamber, brass controls, stainless
steel burners, and a hard baked porcelain exterior. Palomas are easy to service
and all parts are easy to replace.
Freeze Protection Kit
Thermostatically controlled and keep water control
body and water control case assemblies of heater protected againsy frozen damage
to temperature of approximately -4º F (without wind-chill factor).
Features
•
Endless hot water on demand
• Energy saving design
• Energy efficiency - 80% more efficient
 than
tank type water heaters
• Compact, space saving design
• Thermocouple-magnetic pilot safety
device
• Stainless steel burner
• Temperature limiting device
• Gas pressure regulator
• Drain plug
|
|
•
Flexible hot and cold water tubes
• Over heat limiting device
• Piezo igniter
• Temerature adjusting spindle
• Water regulator
|
|
Legacy
24 Extreme Winter Shower Performance
|
|
Simultaneous
Showers Supported
|
GPM
|
| The
Deep Sunbelt (60º inlet) |
2
|
6.5
|
| The
Far North (40º inlet) |
1
|
4.4
|
| This
Guide indicates Legacy 24 performance at the coldest point in the year at
water pressure of 12.9 psi and above. A standard shower is 2.5 GPM at 104o
F. In order to get the full GPM and shower performance with the Legacy
series, it is necessary to heat water at the HOT setting, and then mix with
cold water. This will create scalding conditions in your hot water. USE
WITH CAUTION! Check with your water supplier for actual local conditions. |
Specifications
|
|
|
|
Model
Number
|
|
PH-24M-DP
|
|
PH-24M-DN
|
|
Type
of Gas
|
L.P.
|
NAT
|
Rated
Gas Input (Btu/Hr.)
|
Full
178,500
Min. 37,700
|
Full
178,500
Min. 37,700
|
Dimensions
(Inches)
|
40-3/4 x 18-3/4 x 14-7/8
|
Net
Weight (lbs.)
|
76
|
Minimum
Working
Water
Pressure
|
Minimum 2.4 P.S.I.
Full 12.9 P.S.I.
|
Flue
Size
|
7 Inch Diameter
|
Gas
Connection
|
3/4" NPT Female
|
Water
Connection
|
3/4" NPT Male
|
|
|
Hot
water output degree rise (U.S. gal/min)
|
60º
F Rise
|
0.87
|
| 70º
F Rise |
0.75
|
| 80º
F Rise |
0.65
|
| 90º
F Rise |
Min. 0.58
Full 3.17
|
|
100º
F Rise |
|
Min. 0.52
Full 2.85
|
|
|
|
Click
Here To View The Installation & Owners Manual
Click
Here To View The Specifications
