The Eemax EX1260T12 Series Twelve Electric Tankless Water Heater. This unit features
twelve powerful heating modules. Fitted with 1" NPT bottom pipe connections.
Operating Pressure min 25 PSI max 150 PSI. Recommended for emergency drench showers
to comply with ANSI Z358.1 tepid water requirements (70°-90°) 25 GPM.
Industrial/commercial applications. Equipped with microprocessing thermostats.
Eemax EX1260T12 Series Twelve Electric Tankless Water Heater Applications:
• Eye/Face Combo Drench shower
• Emergency Drench shower
• Commercial/Industrial
• Capacity 4GPM (first stage/EFD Combo) to 25 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency
eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range
• Factories
• Boosters to 180°
Eemax EX1260T12 Series Twelve Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature
and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with
1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check
local codes)
• Micro Processor Technology - accurately maintains outlet temperature
(+/- 1 degree F)
• Splash proof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby
heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.
Eemax EX1260T12 Series Twelve Electric Tankless Water Heater Specifications:
• Dimensions - 32" x 32" x 6"
• Weight - 70lbs
• KW - 126kW
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth),
• 156A/phase,
• Recommended Wire 250MCM
• First Stage eye/face temp Rise at 6 GPM - 72°F, 7.5 GPM - 57°F
• Second Stage drench temp Rise at 20 GPM - 43°F, 23 GPM - 37°F
• Color - White
• Element - 12 replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom
• The voltage, amperage, and circuit breaker specifications must be met
for this heater to function. Please make sure all requirements are met before
purchasing this heater. Manufacturer's start up procedures must be observed.
Note: All of these Eemax units are custom made to order and as such are,
non-returnable and non-refundable. We urge you therefore to check your electrical
supply, making sure all criteria for operating your Eemax water heater are met,
especially that a neutral line is available for all 480Y/277V.
Click
Here For Specification
Activation Turn On Options:
EFD/Combo= For combination Eye/Face Drench Shower. First Stage 4 GPM
turn on (1/2 kW power) Eye/Face, Second Stage 15 GPM turn on (full kW power)
Drench Shower.
DS= For Drench Shower only. (min turn on 12 GPM)
Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)
Enclosure Option:
Nema 4= Waterproof enclosure 42"x36"x12", panel 42"x34.2"
Priced for EX1260T12 EFD/Combo S (EFD/Combo, Sanitation setting 180°)
