The Eemax EX160P2 Series Two "Parallel" Flow Control, Twin Module.
Recommended for higher flow rate hot water applications. Fitted with 3/4" NPT fittings and bottom entry electric. Feed with cold water only. Min.
flow 1.5 GPM Max. 4 GPM.
Eemax EX160P2 Series Two Parallel Flow Electric Tankless Water Heater:
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local
codes).
• Easy Installation - only one cold water line need be brought to lavatory
- integral 3/4" NPT fittings on bottom (no sweat connections).
• Cut Energy Waste - flow switch activates heater only on demand (no standby
heat loss).
• Designed for Durability - constructed of high strength reinforced "ENGINEERING
PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat
transfer and extended element life.
• Reduces calcification.
• Field Serviceable Elements replaceable cartridge element.
• Unit must be mounted on wall.
Eemax EX160P2 Series Two Parallel Flow Electric Tankless Water Heater Applications:
• Industrial Processes
• High Flow Activation
• Cold Water Feed Only
• Mop Sinks
Eemax EX160P2 Series Two Parallel Flow Electric Tankless Water Heater Specifications:
• Dimensions 10" x 9" x 3"
• Weight 8 lbs
• Volts 277V
• KW 16kW
• Amps 58(2x29)A
• Rise at 1.5 GPM 73°F
• Rise at 2 GPM 55°F
• Rise at 3 GPM 36°F
• Wire Size AWG 10 (per module)
• Element - Dual replacement cartridge inserts
• Connections: 3/4" NPT at bottom of unit
•The voltage, amperage, and circuit breaker specifications must be met
for this heater to function. Please make sure all requirements are met before
purchasing this heater. Manufacturer's start up procedures must be observed.
Note: This unit must have 2 independent electrical circuits using correctly
rated wire and 2 circuit breakers.
Click
Here For Specification
EX160P2
