The Eemax EX320DI "De-Ionized", Triple Heating Modules, Three Phase
Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater
is capeable of heating water of the highest purity(up to 18 MEG OHM quality)-
affordably. Its compact design (12"x15") makes the unit particularly
well suited for point of use installation to serve a single or mutiple work
stations. The units utilize Eemax's Instantaneous Water Heating technology,
delivering continous, constant temerature, hot water. All Eemax ultrapure water
heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.
Why Hot De-Ionized water? Hot "DI" water has become an attractive
replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and
must be phased out of all manufactoring operations. Hot De-Ionized water provides
a more aggresive cleaning agent, will flash dry quickly and is "user friendly"
in terms of its disposal. Heated "DI" water has remarkable cleaning
properties and will not pollute the enviroment.
Eemax EX320DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing
Eemax EX320DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used
in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity.
Test conlusion verified no measurable conntamination of water passing through
the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor
to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant
water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point
of use.
Eemax EX320DI "De-Ionized" Single Heating Module Electric Tankless
Water Heater Specifications:
• Dimensions - 12-1/4"x 15-1/4" x 7-1/4"
• Weight - 20lbs
• KW - 32kW
• Amps 39A/phase
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• Recommended Wire Size 8 AWG
• Rise at 2.5 GPM - 87°F
• Rise at 3.0 GPM - 73°F
• Rise at 4.0 GPM - 62°F
• Rise at 5.0 GPM - 44°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless
steel)
• The voltage, amperage, and circuit breaker specifications must be met
for this heater to function. Please make sure all requirements are met before
purchasing this heater. Manufacturer's start up procedures must be observed.
Click
Here For Specification
All Eemax Three-Phase units are custom made to order and as such are, non-returnable
and non-refundable. We urge you therefore to check your electrical supply, making
sure all criteria for operating your Eemax water heater are met, especially
that a neutral line is availablefor all 480Y/277V.
Turn On Options:
T2T=Staged Turn-on .7 GPM, max 3.5 GPM
T3=Parallel Turn-on 1.6 GPM, max 5GPM
Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°
Priced for EX320DI T2T S (Staged Turn-on, Sanitation setting 180°)
