Paloma Industries is the #1 gas appliance manufacturer in Japan. The Paloma line incorporates TWO unique safety features not found on competitive tankless gas water heaters.

This model is supplied with a 120 volt power cord.
Small Capacity to Big Capacity
21,500~145,000 (LP: ~141,000) Btu/Hr

Features • Endless hot water on demand • Energy-saving design • Energy efficiency - 30% more efficient than tank-type water heaters • Compact, space-saving design • Paloma’s exclusive sensing burner and ICAD Safety System to optimize combustion and shut down the unit in case of raised levels of carbon monoxide (indoor units only) • Self-diagnostic program • Waterproof digital remote control for convenience, comfort, and ease of maintenance • Remote control displays adjustable temperature settings • Optional, additional remote controls available • Intelligent electronic controls designed to increase energy efficiency and safety • Exclusive film wrap overheat limiter • Indoor model uses 3" Category III stainless steel venting material • May be installed as part of a circulating water system • Built-in electric blower on all models • Low NOx emissions meet SCAQMD Rule 1121 requirements • Easy expansion with Solo/Duo System • Extensive diagnostics and error display

Residential Warranty • 10-Year Limited Warranty on Heat Exchanger • 3-Year Limited Warranty on Parts

Saftey Features

• First is the OXYGEN DEPLETION SENSING system (Indoor Model Only). Emissions from the sampling burner are constantly analyzed for carbon monoxide gas. If necessary, the fan speed is adjusted by the on board CPU. If the fan speed adjustments do not resolve the combustion problem, the burner will be turned off and a potentially dangerous situation avoided. An error message will be displayed.


• Second is the FILM TYPE OVERHEAT SENSING. This senses high temperature at all positions surrounding the combustion chamber. Other manufactures only sense at one point on the combustion chamber.

Two remote controls (one main control and one bath remote control) can be installed together. One Bath control comes with each unit.

Warranty

• 10 Year warranty on heat exchanger.
• 3 Year warranty on parts.

Note: These units are designed to meet or exceed ANSI (American National Standards Institute) requirements and have been tested according to D.O.E. test procedures and meed or exceed the energy efficiency requirements of NAECA, ASHRAE standard 90, BOCA Code and all state energy efficiency performance criteria for energy consuming appliances.

Specifications
		Indoor			Outdoor
Natural Gas Model Number Wholesale		PH-20R IFSN		PH-20R OFN
Natural Gas Model NumberRetail		N/A			N/A
LP Gas Model NumberWholesale		PH-20R IFSP		PH-20R OFN
LP Gas Model Number Retail		N/A			N/A
Rated Gas Input(BTUs/Hr.)		21,600 (minimum) 145,000 Nat. / 141,0000 LP (maximum) Modulating			21,600 (minimum) 141,0000 (maximum) Modulating
Dimensions (Inches)		13-3/4 (W) x 20-1/2 (H) x 5-5/6 (D)
Empty Net Weight (lbs.)		35
Working Water Pressure		14 psi (minimum); 150 psi (maximum)
Water Flow Rate		0.66 GPM (minimum) 5.3 GPM (maximum) (23 psi)
Gas Connection		3/4" NPT Female (With Supplied Gas Shutoff Valve)
Water Connection		3/4" NPT Male
Vent Size		3" Special Venting			N/A (Outdoor Installation)
Efficiency Rating		82%
Energy Factor		0.82
Electrical Rating		120 VAC/60 Hz, Less than 2 Amps
• Factory-set maximum temperature is 120 degrees F • For installations above 3,280 feet, the connector to the PC board must be replaced. Consult factory or your supplier for details.