The Eemax EX180T3 "Three Phase" Electric Tankless Water Heater. Designed for cold or hot water feed use in Commercial and Industrial applications. Used for a booster or where very accurate water temperature is required.
1.8 GPM turn on. Max 5 GPM.

Eemax EX180T3 "Three Phase" (Triple Module) Thermostatic Parallel Turn On
Specifications:
• Cold or Hot Feed
• Volts 208V
• Delta Configuration
• KW 18kw
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 22A/phase
• Recommended Wire Size 6AWG
• Rise at 2 GPM 61°F
• Rise at 3 GPM 41°F
• Rise at 4 GPM 32°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX180T3 208/120V- no neutral leg, 18 kw, 50A/phase, 6AWG wire
EX180T3 480/277V- neutral leg required, 18 kw, 22A/phase, 10AWG wire

Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX180T3S 208/120V- no neutral leg, 18 kw, 50A/phase, Sanitation setting 180°