EEMAX97

The Eemax EX2412TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordable. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or multiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continuous, constant temperature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted surfaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleting and must be phased out of all manufacturing operations. Hot De-Ionized water provides a more aggressive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX2412TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microchip Manufacturing
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX2412TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- state of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conclusion verified no measurable contamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX2412TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 2.4kW
• Volts 120V
• Amps 20A
• Recommended Wire 10AWG
• Rise at 0.5 GPM - 33°F
• Rise at 1.0 GPM - 16°F
• Rise at 2.0 GPM - 8°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX2412TDI S (Sanitation setting 180°)

EEMAX98

The Eemax EX3012TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capable of heating water of the highest purity(up to 18 MEG OHM quality)- affordable. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or multiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continuous, constant temperature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted surfaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleting and must be phased out of all manufacturing operations. Hot De-Ionized water provides a more aggressive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the environment.

Eemax EX3012TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microchip Manufacturing
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX3012TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- state of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conclusion verified no measurable contamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX3012TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 3.0kW
• Volts 120V
• Amps 25A
• Recommended Wire 10AWG
• Rise at 0.5 GPM - 41°F
• Rise at 1.0 GPM - 20°F
• Rise at 2.0 GPM - 10°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX3012TDI S (Sanitation setting 180°)

EEMAX99

The Eemax EX3512TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capable of heating water of the highest purity(up to 18 MEG OHM quality)- affordable. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or multiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continuous, constant temperature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted surfaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleting and must be phased out of all manufacturing operations. Hot De-Ionized water provides a more aggressive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the environment.

Eemax EX3512TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microchip Manufacturing
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX3512TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- state of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conclusion verified no measurable contamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX3512TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 3.5kW
• Volts 120V
• Amps 29A
• Recommended Wire 10AWG
• Rise at 0.5 GPM - 48°F
• Rise at 1.0 GPM - 24°F
• Rise at 2.0 GPM - 12°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX3512TDI S (Sanitation setting 180°)

EEMAX100

The Eemax EX55TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capable of heating water of the highest purity(up to 18 MEG OHM quality)- affordable. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or multiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continuous, constant temperature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted surfaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleting and must be phased out of all manufacturing operations. Hot De-Ionized water provides a more aggressive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the environment.

Eemax EX55TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microchip Manufacturing
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX55TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- state of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conclusion verified no measurable contamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX55TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 5.5kW
• Volts 240V
• Amps 23A
• Recommended Wire 10AWG
• Rise at 0.5 GPM - 75°F
• Rise at 1.0 GPM - 38°F
• Rise at 2.0 GPM - 19°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX55TDI S (Sanitation setting 180°)

EEMAX101

The Eemax EX65TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capable of heating water of the highest purity(up to 18 MEG OHM quality)- affordable. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or multiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continuous, constant temperature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted surfaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleting and must be phased out of all manufacturing operations. Hot De-Ionized water provides a more aggressive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the environment.

Eemax EX65TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microchip Manufacturing
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX65TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- state of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conclusion verified no measurable contamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX65TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 6.5kW
• Volts 240V
• Amps 27A
• Recommended Wire 10AWG
• Rise at 0.5 GPM - 89°F
• Rise at 1.0 GPM - 44°F
• Rise at 2.0 GPM - 22°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX65TDI S (Sanitation setting 180°)

EEMAX102

The Eemax EX75TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX75TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX75TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX75TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 7.5kW
• Volts 240V
• Amps 32A
• Recommended Wire 8 AWG
• Rise at 0.75 GPM - 68°F
• Rise at 1.0 GPM - 51°F
• Rise at 2.0 GPM - 26°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX75TDI S (Sanitation setting 180°)

EEMAX103

The Eemax EX95TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX95TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX95TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX95TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 9.5kW
• Volts 240V
• Amps 40A
• Recommended Wire 8 AWG
• Rise at 0.75 GPM - 87°F
• Rise at 1.0 GPM - 65°F
• Rise at 2.0 GPM - 32°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX95TDI S (Sanitation setting 180°)

EEMAX104

The Eemax EX8208TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX8208TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX8208TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX8208TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 8.3kW
• Volts 208V
• Amps 40A
• Recommended Wire 8 AWG
• Rise at 0.75 GPM - 76°F
• Rise at 1.0 GPM - 57°F
• Rise at 2.0 GPM - 28°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX8208TDI S (Sanitation setting 180°)

EEMAX105

The Eemax EX60TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX60TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX60TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX60TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 6.0kW
• Volts 277V
• Amps 22A
• Recommended Wire 10 AWG
• Rise at 0.5 GPM - 82°F
• Rise at 1.0 GPM - 41°F
• Rise at 2.0 GPM - 20°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX60TDI S (Sanitation setting 180°)

EEMAX106

The Eemax EX80TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX80TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX80TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX80TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 8.0kW
• Volts 277V
• Amps 29A
• Recommended Wire 10 AWG
• Rise at 0.75 GPM - 73°F
• Rise at 1.0 GPM - 55°F
• Rise at 2.0 GPM - 27°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX80TDI S (Sanitation setting 180°)

EEMAX107

The Eemax EX90TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX90TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX90TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX90TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 9.0kW
• Volts 277V
• Amps 32A
• Recommended Wire 8 AWG
• Rise at 0.75 GPM - 82°F
• Rise at 1.0 GPM - 61°F
• Rise at 2.0 GPM - 31°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX90TDI S (Sanitation setting 180°)

EEMAX108

The Eemax EX100TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX100TDI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX100TDI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX100TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10-3/4" x 5-1/4" x 3"
• Weight - 10lbs
• KW - 10.0kW
• Volts 277V
• Amps 36A
• Recommended Wire 8 AWG
• Rise at 0.75 GPM - 91°F
• Rise at 1.0 GPM - 68°F
• Rise at 2.0 GPM - 34°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX100TDI S (Sanitation setting 180°)

EEMAX109

The Eemax EX144DI "De-Ionized", Dual Heating Modules, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX144DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX144DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX144DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10"x 9" x 4-1/4"
• Weight - 12lbs
• KW - 15.0kW
• Volts 240V
• Amps 64 (2x32)A
• Recommended Wire 8 AWG per module
• Rise at 2.0 GPM - 51°F
• Rise at 3.0 GPM - 34°F
• Rise at 4.0 GPM - 26°F
• Rise at 5.0 GPM - 20°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Turn On Options:
TC=Staged Turn-on .7 GPM, max 3 GPM
T2=Parallel Turn-on 1.3 GPM, max 4 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX144DI TC S (Staged Turn-on, Sanitation setting 180°)

EEMAX110

The Eemax EX190DI "De-Ionized", Dual Heating Modules, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX190DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX190DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX190DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10"x 9" x 4-1/4"
• Weight - 12lbs
• KW - 19.0kW
• Volts 240V
• Amps 80 (2x40)A
• Recommended Wire 8 AWG per module
• Rise at 2.0 GPM - 65°F
• Rise at 3.0 GPM - 43°F
• Rise at 4.0 GPM - 32°F
• Rise at 5.0 GPM - 26°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Turn On Options:
TC=Staged Turn-on .7 GPM, max 3 GPM
T2=Parallel Turn-on 1.3 GPM, max 4 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX190DI TC S (Staged Turn-on, Sanitation setting 180°)

EEMAX111

The Eemax EX1608DI "De-Ionized", Dual Heating Modules, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX1608DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX1608DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX1608DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10"x 9" x 4-1/4"
• Weight - 12lbs
• KW - 16.6kW
• Volts 208V
• Amps 80 (2x40)A
• Recommended Wire 8 AWG per module
• Rise at 2.0 GPM - 57°F
• Rise at 3.0 GPM - 38°F
• Rise at 4.0 GPM - 28°F
• Rise at 5.0 GPM - 23°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Turn On Options:
TC=Staged Turn-on .7 GPM, max 3 GPM
T2=Parallel Turn-on 1.3 GPM, max 4 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX1608DI TC S (Staged Turn-on, Sanitation setting 180°)

EEMAX112

The Eemax EX160DI "De-Ionized", Dual Heating Modules, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX160DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX160DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX160DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10"x 9" x 4-1/4"
• Weight - 12lbs
• KW - 16kW
• Volts 277V
• Amps 58(2x29)A
• Recommended Wire 10AWG per module
• Rise at 2.0 GPM - 55°F
• Rise at 3.0 GPM - 36°F
• Rise at 4.0 GPM - 27°F
• Rise at 5.0 GPM - 22°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Turn On Options:
TC=Staged Turn-on .7 GPM, max 3 GPM
T2=Parallel Turn-on 1.3 GPM, max 4 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX160DI TC S (Staged Turn-on, Sanitation setting 180°)

EEMAX113

The Eemax EX200DI "De-Ionized", Dual Heating Modules, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX200DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX200DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX200DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 10"x 9" x 4-1/4"
• Weight - 12lbs
• KW - 20kW
• Volts 277V
• Amps 72(2x36)A
• Recommended Wire 8 AWG per module
• Rise at 2.0 GPM - 68°F
• Rise at 3.0 GPM - 46°F
• Rise at 4.0 GPM - 34°F
• Rise at 5.0 GPM - 27°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Turn On Options:
TC=Staged Turn-on .7 GPM, max 3 GPM
T2=Parallel Turn-on 1.3 GPM, max 4 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX200DI TC S (Staged Turn-on, Sanitation setting 180°)

EEMAX114

The Eemax EX180DI "De-Ionized", Triple Heating Modules, Three Phase Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX180DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX180DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX180DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 12-1/4"x 15-1/4" x 7-1/4"
• Weight - 20lbs
• KW - 18kW
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• Rise at 2.0 GPM - 61°F
• Rise at 3.0 GPM - 41°F
• Rise at 4.0 GPM - 31°F
• Rise at 5.0 GPM - 25°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Options:
EX180DI 208/120V- no neutral leg, 18 kw, 50A/phase, 6AWG wire
EX180DI 480/277V- neutral leg required, 18 kw, 22A/phase, 10AWG wire

Turn On Options:
T2T=Staged Turn-on .7 GPM, max 3.5 GPM
T3=Parallel Turn-on 1.6 GPM, max 5GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX180DI T2T S (208/120V- 50A/phase, Staged Turn-on, Sanitation setting 180°)

EEMAX115

The Eemax EX240DI "De-Ionized", Triple Heating Modules, Three Phase Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX240DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX240DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX240DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 12-1/4"x 15-1/4" x 7-1/4"
• Weight - 20lbs
• KW - 24kW
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• Rise at 2.0 GPM - 82°F
• Rise at 3.0 GPM - 55°F
• Rise at 4.0 GPM - 41°F
• Rise at 5.0 GPM - 33°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Options:
EX240DI 208/120V- no neutral leg, 18 kw, 67A/phase, 6AWG wire
EX240DI 480/277V- neutral leg required, 18 kw, 29A/phase, 10AWG wire

Turn On Options:
T2T=Staged Turn-on .7 GPM, max 3.5 GPM
T3=Parallel Turn-on 1.6 GPM, max 5GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX240DI T2T S (208/120V- 67A/phase, Staged Turn-on, Sanitation setting 180°)

EEMAX116

The Eemax EX320DI "De-Ionized", Triple Heating Modules, Three Phase Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX320DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX320DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX320DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 12-1/4"x 15-1/4" x 7-1/4"
• Weight - 20lbs
• KW - 32kW
• Amps 39A/phase
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• Recommended Wire Size 8 AWG
• Rise at 2.5 GPM - 87°F
• Rise at 3.0 GPM - 73°F
• Rise at 4.0 GPM - 62°F
• Rise at 5.0 GPM - 44°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is availablefor all 480Y/277V.

Turn On Options:
T2T=Staged Turn-on .7 GPM, max 3.5 GPM
T3=Parallel Turn-on 1.6 GPM, max 5GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX320DI T2T S (Staged Turn-on, Sanitation setting 180°)

EEMAX117

The Eemax EX280DI "De-Ionized", Triple Heating Modules, Single Phase Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capeable of heating water of the highest purity(up to 18 MEG OHM quality)- affordably. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or mutiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continous, constant temerature, hot water. All Eemax ultrapure water heaters utilize the highest quality materials. 316 stainless steel wetted sufaces.

Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleteing and must be phased out of all manufactoring operations. Hot De-Ionized water provides a more aggresive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the enviroment.

Eemax EX280DI "De-Ionized" Electric Tankless Water Heater Applications:
• Microhip Manufactoring
• Pharmaceutical production
• High Tolerance Component Cleaning
• Ultrasonic Cleaning
• Spray Rinse Tank
• Batch Chemical Mixing

Eemax EX280DI "De-Ionized" Electric Tankless Water Heater Features:
• Cold or Hot water feed
• Capable of Heating High Purity Water- stae of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
• Test Proven by independent analytical laboratory to maintain water purity. Test conlusion verified no measurable conntamination of water passing through the Eemax heater. Test results available upon request.
• Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
• Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
• Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
• Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
• Easy Installation- compact size, allows for installation close to point of use.

Eemax EX280DI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
• Dimensions - 12-1/4"x 15-1/4" x 7-1/4"
• Weight - 20lbs
• KW - 28kW
• Amps 3x40A
• Volts 240V
• Recommended Wire Size 8 AWG per module
• Rise at 2.0 GPM - 96°F
• Rise at 3.0 GPM - 64°F
• Rise at 4.0 GPM - 48°F
• Rise at 5.0 GPM - 38°F
• Bottom water connections, 1/2" compression fitting (type 316 stainless steel)

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Turn On Options:
T2T=Staged Turn-on .7 GPM, max 3.5 GPM
T3=Parallel Turn-on 1.6 GPM, max 5GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°

Priced for EX280DI T2T S (Staged Turn-on, Sanitation setting 180°)