EEMAX01
Eemax Series 3 Whole House Tankless Water Heater EX280T2T
$687.46
Additional Info
The Eemax EX280T2T Series Three Electric Tankless Water Heater.Whole house unit for multiple showers. Turns on in stages, based upon water flow rate. Equipped with microprocessing temp control with staged heating modules. Eemax EX280T2T Series Three Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 12" x 12" x 3.5"
• Reduces Calcification.
• Field Serviceable Element - replaceable cartridge element Eemax EX280T2T Series Three Electric Tankless Water Heater Applications:
• Engineered to turn on in stages
• Uses energy for amount of flow
• Sophisticated thermostat delivers precise outlet temperature
• Cold or Hot water feed 
Eemax EX280T2T Series Three Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 12 lbs
• Volts 240V
• KW 28.5kW
• Amps 120(3x40)A
• Rise at 2 GPM 96°F
• Rise at 3 GPM 65°F
• Rise at 4 GPM 47°F
• Wire Size AWG 8
• Element - Triple replaceable Ni Chrome cartridge element inserts
• Connections: 5/8" i.d. compression (1/2" copper pipe) at bottom of unit.
• Operating pressure minimum: 25psi
• Operating pressure maximum: 150psi
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
Click Here For Specification
EX280T2T
|
EEMAX02
Eemax Series 2 Whole House Tankless Water Heater EX144T
$399.00
Additional Info
The Eemax EX144T Series Two Electric Tankless Water Heater with Single Thermostatic Control. This unit is ideal for serving an entire condo, apartment, smaller house or cabin. It would replace the existing tank type water heater, being fed with cold water only. Minimum switch on flow rate 0.7 GPM. Easily adjustable thermostat gives exact temperature control. Turns on in stages based on hot water demand. Eemax EX144T Series Two Electric Tankless Water Heater with Single Thermostatic Control Features:
•Available thermostatic control "TC" helps insure accurate outlet temperatures (±0.5°F). Hot or Cold water feed.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/4" NPT fittings on bottom (no sweat connections).
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss).
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Reduces calcification.
• Field Serviceable Elements replaceable cartridge element.
• Unit must be mounted on wall.
Eemax EX144TC Series Two Electric Tankless Water Heater with Single Thermostatic Control Applications:
• Residential Showers
• Industrial Processes
• Photo Processing
• Adjustable, Precise Temperature Setting ±0.5°F • Anti-scald Protection
• (TC) Only- Solar Back-up Eemax EX144T Series Two Electric Tankless Water Heater with Single Thermostatic Control Specifications:
• Dimensions 10" x 9" x 3"
• Weight 8 lbs
• Volts 240V
• KW 15.0kW
• Amps 64(2x32)A
• Rise at 1.5 GPM 65°F
• Rise at 2 GPM 51°F
• Rise at 3 GPM 34°F
• Wire Size AWG 8
• Element - Dual replacement cartridge inserts
• Connections: 3/4" NPT at bottom of unit
•The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed. Note: This unit must have 2 independent electrical circuits using correctly rated wire and 2 circuit breakers.
Click Here For Specification
TC=Hot or Cold Water Feed Only
ML=Multi Lavs
Priced for EX144TC
|
EEMAX03
Eemax Series 2 Whole House Tankless Water Heater EX190T
$399.00
Additional Info
The Eemax EX190T Series Two Electric Tankless Water Heater with Single Thermostatic Control. This unit is ideal for serving an entire condo, apartment, smaller house or cabin. It would replace the existing tank type water heater, being fed with cold water only. Minimum switch on flow rate 0.75 GPM. Easily adjustable thermostat gives exact temperature control. Eemax EX190T Series Two
•Available thermostatic control "TC" helps insure accurate outlet temperatures (±0.5°F). Hot or Cold water feed.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/4" NPT fittings on bottom (no sweat connections).
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss).
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Reduces calcification.
• Field Serviceable Elements replaceable cartridge element
• Unit must be mounted on wall. Eemax EX190T Series Two Electric Tankless Water Heater with Single Thermostatic Control Applications:
• Residential Showers
• Industrial Processes
• Photo Processing
• Adjustable, Precise Temperature Setting ±0.5°F • Anti-scald Protection
• (TC) Only- Solar Back-up
Eemax EX190T Series Two Electric Tankless Water Heater with Single Thermostatic Control Specifications:
• Dimensions 10" x 9" x 3"
• Weight 8 lbs
• Volts 240V
• KW 19.0kW
• Amps 80(2x40)A
• Rise at 1.5 GPM 87°F
• Rise at 2 GPM 65°F
• Rise at 3 GPM 43°F
• Wire Size AWG 8
• Element - Dual replacement cartridge inserts
• Connections: 3/4" NPT at bottom of unit
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed. Note: This unit must have 2 independent electrical circuits using correctly rated wire and 2 circuit breakers.
Click Here For Specification
TC=Hot or Cold Water Feed Only
ML=Multi Lavs
Priced for EX190TC
|
