EEMAX43

Eemax EX180P3 "Three Phase" (Triple Module) Parallel
Specifications:
• Cold Feed
• Volts 208V
• Delta Configuration
• KW 18kw
• 50A/phase
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• Recommended Wire Size 6AWG
• Rise at 2 GPM 61°F
• Rise at 3 GPM 41°F
• Rise at 4 GPM 32°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX180P3 208/120V- no neutral leg, 18 kw, 50A/phase, 6AWG wire
EX180P3 480/277V- neutral leg required, 18 kw, 22A/phase, 10AWG wire

Priced for EX180P3 208/120V- no neutral leg, 18 kw, 50A/phase

EEMAX44

The Eemax EX180T3 "Three Phase" Electric Tankless Water Heater. Designed for cold or hot water feed use in Commercial and Industrial applications. Used for a booster or where very accurate water temperature is required.
1.8 GPM turn on. Max 5 GPM.

Eemax EX180T3 "Three Phase" (Triple Module) Thermostatic Parallel Turn On
Specifications:
• Cold or Hot Feed
• Volts 208V
• Delta Configuration
• KW 18kw
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 22A/phase
• Recommended Wire Size 6AWG
• Rise at 2 GPM 61°F
• Rise at 3 GPM 41°F
• Rise at 4 GPM 32°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX180T3 208/120V- no neutral leg, 18 kw, 50A/phase, 6AWG wire
EX180T3 480/277V- neutral leg required, 18 kw, 22A/phase, 10AWG wire

Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX180T3S 208/120V- no neutral leg, 18 kw, 50A/phase, Sanitation setting 180°

EEMAX45

The Eemax EX180T2T "Three Phase" Electric Tankless Water Heater. Designed for cold or hot water feed use in Commercial and Industrial applications. Designed to turn on in stages based on flow, will maintain precise outlet temperature. .7 GPM turn on. Max 4 GPM.

Eemax EX180T2T "Three Phase" (Triple Module) Thermostatic Staged Turn On
Specifications:
• Cold or Hot Feed
• Volts 208V
• Delta Configuration
• KW 18kw
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 50A/phase
• Recommended Wire Size 6AWG
• Rise at 2 GPM 61°F
• Rise at 3 GPM 41°F
• Rise at 4 GPM 32°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX180T2T 208/120V- no neutral leg, 18 kw, 50A/phase, 6AWG wire
EX180T2T 480/277V- neutral leg required, 18 kw, 22A/phase, 10AWG wire

Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML-Multi Lavs temp setting 105°-110° .5turn on up to 8 lavs
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX180T2T S 208/120V- no neutral leg, 18 kw, 50A/phase, Sanitation setting 180°

EEMAX46

Eemax EX240P3 "Three Phase" (Triple Module) Parallel
Specifications:
• Cold Feed
• Volts 208V
• Delta Configuration
• KW 24kw
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 67A/phase
• Recommended Wire Size 6AWG
• Rise at 2 GPM 82°F
• Rise at 3 GPM 54°F
• Rise at 4 GPM 41°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX240P3 208/120V- no neutral leg, 24kw, 67A/phase, 6AWG wire
EX240P3 480/277V- neutral leg required, 24kw, 29A/phase, 10AWG wire

Priced for EX240P3 208/120V- no neutral leg, 24kw, 67A/phase

EEMAX47

The Eemax EX240T3 "Three Phase" Electric Tankless Water Heater. Designed for cold or hot water feed use in Commercial and Industrial applications. Used for a booster or where very accurate water temperature is required.
1.8 GPM turn on. Max 5 GPM.

Eemax EX240T3 "Three Phase" (Triple Module) Thermostatic Parallel Turn On
Specifications:
• Cold or Hot Feed
• Volts 208V
• Delta Configuration
• KW 24kw
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 67A/phase
• Recommended Wire Size 6AWG
• Rise at 2 GPM 82°F
• Rise at 3 GPM 54°F
• Rise at 4 GPM 41°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX240T3 208/120V- no neutral leg, 24kw, 67A/phase, 6AWG wire
EX240T3 480/277V- neutral leg required, 24kw, 29A/phase, 10AWG wire

Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX240T3S 208/120V- no neutral leg, 24kw, 67A/phase, Sanitation setting 180°

EEMAX48

The Eemax EX240T2T "Three Phase" Electric Tankless Water Heater. Designed for cold or hot water feed use in Commercial and Industrial applications. Designed to turn on in stages based on flow, will maintain precise outlet temperature. .7 GPM turn on. Max 4 GPM.

Eemax EX240T2T "Three Phase" (Triple Module) Thermostatic Staged Turn On
Specifications:
• Cold or Hot Feed
• Volts 208V
• Delta Configuration
• KW 24kw
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 67A/phase
• Recommended Wire Size 6AWG
• Rise at 2 GPM 82°F
• Rise at 3 GPM 54°F
• Rise at 4 GPM 41°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX240T2T 208/120V- no neutral leg, 24kw, 67A/phase, 6AWG wire
EX240T2T 480/277V- neutral leg required, 24kw, 29A/phase, 10AWG wire

Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML-Multi Lavs temp setting 105°-110° .5turn on up to 8 lavs
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX240T2T S 208/120V- no neutral leg, 124kw, 67A/phase, Sanitation setting 180°

EEMAX49

Eemax EX180P3 "Three Phase" (Triple Module) Parallel
Specifications:
• Cold Feed
• Volts 480Y/277V
• Delta Configuration
• KW 32kw
• 39A/phase
• requires: 3 lives, 1 ground (earth) (no neutral)
• Recommended Wire Size 8AWG
• Rise at 2.5 GPM 87°F
• Rise at 3.5 GPM 62°F
• Rise at 5 GPM 45°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

EX320P3 480/277V- neutral leg required, 32kw, 39A/phase, 8AWG wire

EEMAX50

The Eemax EX320T3 "Three Phase" Electric Tankless Water Heater. Designed for cold or hot water feed use in Commercial and Industrial applications. Used for a booster or where very accurate water temperature is required.
1.8 GPM turn on. Max 5 GPM.

Eemax EX320T3 "Three Phase" (Triple Module) Thermostatic Parallel Turn On
Specifications:
• Cold or Hot Feed
• 480Y/277V
• Delta Configuration
• KW 32kw
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 39A/phase
• Recommended Wire Size 8AWG
• Rise at 2.5 GPM 87°F
• Rise at 3.5 GPM 62°F
• Rise at 5 GPM 45°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX320T3 480/277V- neutral leg required, 32kw, 39A/phase, 8AWG wire

Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX320T3S 480/277V- neutral leg required, 32kw, 39A/phase, Sanitation setting 180°

EEMAX51

The Eemax EX320T2T "Three Phase" Electric Tankless Water Heater. Designed for cold or hot water feed use in Commercial and Industrial applications. Designed to turn on in stages based on flow, will maintain precise outlet temperature. .7 GPM turn on. Max 4 GPM.

Eemax EX320T2T "Three Phase" (Triple Module) Thermostatic Staged Turn On
Specifications:
• Cold or Hot Feed
• 480/277V
• Delta Configuration
• KW 32kW
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 39A/phase
• Recommended Wire Size 8AWG
• Rise at 2.5 GPM 87°F
• Rise at 3.5 GPM 62°F
• Rise at 4 GPM 55°F
• Weight 15 lbs

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

•All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specifications

Options:
EX320T2T 480/277V- neutral leg required, 32kw, 39A/phase, 8AWG wire

Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML-Multi Lavs temp setting 105°-110° .5turn on up to 8 lavs
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX320T2T S 480/277V- neutral leg required, 32kw, 39A/phase, Sanitation setting 180°

EEMAX89

Eemax EX360 Series Six Electric Tankless Water Heater Applications:
• Eye/Face Combo "Tepid" Water
• Commercial/Industrial
• Capacity 4 to 13 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range

Eemax EX360 Series Six Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1°F)
• Splash proof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax EX360 Series Six Electric Tankless Water Heater Specifications:
• Dimensions - 32-3/32" x 20-3/32" x 6-3/32"
• Weight - 42 lbs
• KW - 36.0kW
• Rise at 5 GPM - 49°F
• Rise at 6 GPM - 41°F
• Rise at 7.5 GPM - 32°F
• Rise at 10 GPM - 24°F
• Color - White
• Element - Six replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral), 100A/phase, Recommended Wire 1 AWG
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth), 43A/phase, Recommended Wire 4 AWG

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specification

Volts/Amps Option:
208/120Vrequires: 3 lives, 1 ground (earth) (no neutral), 100A/phase, Recommended Wire 1 AWG or
480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth), 43A/phase, Recommended Wire 4 AWG

Activation Turn On Options:
T6=Parallel turns on 4 GPM max flow 12 GPM
T24T=Turns on in stages, first stage 1 GPM, second stage 1.8 GPM, third stage 3.2 GPM, max. 6 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)
EF/Combo=Tepid water temperature setting emergency eye/face wash

Enclosure Option:
Nema 4= Waterproof enclosure 36"x30"x12"

Priced for EX360T6 S (208/120V requires: 3 lives, 1 ground (earth) (no neutral), Parallel turn on, Sanitation setting 180°)

EEMAX90

Eemax EX480 Series Six Electric Tankless Water Heater Applications:
• Eye/Face Combo "Tepid" Water
• Commercial/Industrial
• Capacity 4 to 13 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range

Eemax EX480 Series Six Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1°F)
• Splash proof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax EX480 Series Six Electric Tankless Water Heater Specifications:
• Dimensions - 32-3/32" x 20-3/32" x 6-3/32"
• Weight - 42 lbs
• KW - 48.0kW
• Rise at 5 GPM - 65°F
• Rise at 6 GPM - 54°F
• Rise at 7.5 GPM - 43°F
• Rise at 10 GPM - 32°F
• Color - White
• Element - Six replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral), 133A/phase, Recommended Wire 2/0 AWG
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth), 58A/phase, Recommended Wire 3 AWG

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specification

Volts/Amps Option:
208/120V requires: 3 lives, 1 ground (earth) (no neutral), 133A/phase, Recommended Wire 2/0 AWG or
480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth), 58A/phase, Recommended Wire 3 AWG

Activation Turn On Options:
T6=Parallel turns on 4 GPM max flow 12 GPM
T24T=Turns on in stages, first stage 1 GPM, second stage 1.8 GPM, third stage 3.2 GPM, max. 6 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)
EF/Combo=Tepid water temperature setting emergency eye/face wash

Enclosure Option:
Nema 4= Waterproof enclosure 36"x30"x12"

Priced for EX480T6 S (208/120V requires: 3 lives, 1 ground (earth) (no neutral), Parellel turn on, Sanitation setting 180°)

EEMAX91

Eemax EX540 Series Six Electric Tankless Water Heater Applications:
• Eye/Face Combo "Tepid" Water
• Commercial/Industrial
• Capacity 4 to 13 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range

Eemax EX540 Series Six Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1°F)
• Splash proof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax EX540 Series Six Electric Tankless Water Heater Specifications:
• Dimensions - 32-3/32" x 20-3/32" x 6-3/32"
• Weight - 42 lbs
• Volts - 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• KW - 54.0kW
• Amps- 65A phase
• Rise at 5 GPM - 73°F
• Rise at 6 GPM - 61°F
• Rise at 7.5 GPM - 49°F
• Rise at 10 GPM - 36°F
• Recommended wire size 2 AWG
• Color - White
• Element - Six replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specification

Activation Turn On Options:
T6=Parallel turns on 4 GPM max flow 12 GPM
T24T=Turns on in stages, first stage 1 GPM, second stage 1.8 GPM, third stage 3.2 GPM, max. 6 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)
EF/Combo=Tepid water temperature setting emergency eye/face wash

Enclosure Option:
Nema 4= Waterproof enclosure 36"x30"x12"

Priced for EX540T6 S (Parallel turn on, Sanitation setting 180°)

EEMAX92

Eemax EX630 Series Six Electric Tankless Water Heater Applications:
• Eye/Face Combo "Tepid" Water
• Commercial/Industrial
• Capacity 4 to 13 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range

Eemax EX630 Series Six Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1°F)
• Splash proof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax EX630 Series Six Electric Tankless Water Heater Specifications:
• Dimensions - 32-3/32" x 20-3/32" x 6-3/32"
• Weight - 42 lbs
• Volts - 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• KW - 63.0kW
• Amps- 76A phase
• Rise at 5 GPM - 86°F
• Rise at 6 GPM - 71°F
• Rise at 7.5 GPM - 57°F
• Rise at 10 GPM - 43°F
• Recommended wire size 1 AWG
• Color - White
• Element - Six replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specification

Activation Turn On Options:
T6=Parallel turns on 4 GPM max flow 12 GPM
T24T=Turns on in stages, first stage 1 GPM, second stage 1.8 GPM, third stage 3.2 GPM, max. 6 GPM

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)
EF/Combo=Tepid water temperature setting emergency eye/face wash

Enclosure Option:
Nema 4= Waterproof enclosure 36"x30"x12"

Priced for EX630T6 S (Parallel turn on, Sanitation setting 180°)

EEMAX93

Eemax EX720T12 Series Twelve Electric Tankless Water Heater Applications:
• Eye/Face Combo Drench shower
• Emergency Drench shower
• Commercial/Industrial
• Capacity 4GPM (first stage/EFD Combo) to 25 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range
• Factories
• Boosters to 180°

Eemax EX720T12 Series Twelve Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1 degree F)
• Splashproof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax EX720T12 Series Twelve Electric Tankless Water Heater Specifications:
• Dimensions - 32" x 32" x 6"
• Weight - 70lbs
• KW - 72.0kW
• First Stage eye/face temp Rise at 6 GPM - 41°F, 7.5 GPM - 33°F
• Second Stage drench temp Rise at 20 GPM - 25°F, 23 GPM - 21°F
• Color - White
• Element - 12 replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom
• 208V/3Ø requires: 3 lives, 1 ground (earth) (no neutral), 200A/phase, Recommended Wire 300MCM
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth), 87A/phase, Recommended Wire 1/0AWG

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is availablefor all 480Y/277V.

Click Here For Specification

Volts/Amps Option:
208V/3Ø requires: 3 lives, 1 ground (earth) (no neutral), 200A/phase, Recommended Wire 300MCM
480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth), 87A/phase, Recommended Wire 1/0AWG

Activation Turn On Options:
EFD/Combo= For combination Eye/Face Drench Shower. First Stage 4 GPM turn on (1/2 kW power) Eye/Face, Second Stage 15 GPM turn on (full kW power) Drench Shower.
DS= For Drench Shower only. (min turn on 12 GPM)

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)

Enclosure Option:
Nema 4= Waterproof enclosure 42"x36"x12", panel 42"x34.2"

Priced for EX720T12 EFD/Combo S (208V/3Ø requires: 3 lives, 1 ground (earth) (no neutral), EFD/Combo, Sanitation setting 180°)

EEMAX94

Eemax EX960T12 Series Twelve Electric Tankless Water Heater Applications:
• Eye/Face Combo Drench shower
• Emergency Drench shower
• Commercial/Industrial
• Capacity 4GPM (first stage/EFD Combo) to 25 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range
• Factories
• Boosters to 180°

Eemax EX960T12 Series Twelve Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1 degree F)
• Splash proof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax EX960T12 Series Twelve Electric Tankless Water Heater Specifications:
• Dimensions - 32" x 32" x 6"
• Weight - 70lbs
• KW - 96.0kW
• First Stage eye/face temp Rise at 6 GPM - 55°F, 7.5 GPM - 44°F
• Second Stage drench temp Rise at 20 GPM - 33°F, 23 GPM - 28°F
• Color - White
• Element - 12 replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom
• 208V/3Ø requires: 3 lives, 1 ground (earth) (no neutral), 200A/phase, Recommended Wire 300MCM
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth), 116A/phase, Recommended Wire 3/0AWG

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specification

Volts/Amps Option:
208V/3Ø requires: 3 lives, 1 ground (earth) (no neutral), 200A/phase, Recommended Wire 300MCM
480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth), 116A/phase, Recommended Wire 3/0AWG

Activation Turn On Options:
EFD/Combo= For combination Eye/Face Drench Shower. First Stage 4 GPM turn on (1/2 kW power) Eye/Face, Second Stage 15 GPM turn on (full kW power) Drench Shower.
DS= For Drench Shower only. (min turn on 12 GPM)

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)

Enclosure Option:
Nema 4= Waterproof enclosure 42"x36"x12", panel 42"x34.2"

Priced for EX960T12 EFD/Combo S (208V/3Ø requires: 3 lives, 1 ground (earth) (no neutral), EFD/Combo, Sanitation setting 180°)

EEMAX95

Eemax EX1080T12 Series Twelve Electric Tankless Water Heater Applications:
• Eye/Face Combo Drench shower
• Emergency Drench shower
• Commercial/Industrial
• Capacity 4GPM (first stage/EFD Combo) to 25 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range
• Factories
• Boosters to 180°

Eemax EX1080T12 Series Twelve Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1 degree F)
• Splash proof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax EX1080T12 Series Twelve Electric Tankless Water Heater Specifications:
• Dimensions - 32" x 32" x 6"
• Weight - 70lbs
• KW - 108kW
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth),
• 116A/phase,
• Recommended Wire 4/0AWG
• First Stage eye/face temp Rise at 6 GPM - 61°F, 7.5 GPM - 49°F
• Second Stage drench temp Rise at 20 GPM - 37°F, 23 GPM - 32°F
• Color - White
• Element - 12 replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specification

Activation Turn On Options:
EFD/Combo= For combination Eye/Face Drench Shower. First Stage 4 GPM turn on (1/2 kW power) Eye/Face, Second Stage 15 GPM turn on (full kW power) Drench Shower.
DS= For Drench Shower only. (min turn on 12 GPM)

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)

Enclosure Option:
Nema 4= Waterproof enclosure 42"x36"x12", panel 42"x34.2"

Priced for EX1080T12 EFD/Combo S (EFD/Combo, Sanitation setting 180°)

EEMAX96

Eemax EX1260T12 Series Twelve Electric Tankless Water Heater Applications:
• Eye/Face Combo Drench shower
• Emergency Drench shower
• Commercial/Industrial
• Capacity 4GPM (first stage/EFD Combo) to 25 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. Minimum flow 3 GPM
• "Tepid" water, (60° to 95°) range
• Factories
• Boosters to 180°

Eemax EX1260T12 Series Twelve Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1 degree F)
• Splash proof Enclosure
• Prevents legionella, mycrobacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax EX1260T12 Series Twelve Electric Tankless Water Heater Specifications:
• Dimensions - 32" x 32" x 6"
• Weight - 70lbs
• KW - 126kW
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth),
• 156A/phase,
• Recommended Wire 250MCM
• First Stage eye/face temp Rise at 6 GPM - 72°F, 7.5 GPM - 57°F
• Second Stage drench temp Rise at 20 GPM - 43°F, 23 GPM - 37°F
• Color - White
• Element - 12 replaceable cartridge elements plus two spares
• Pipe-Fittings - 1" NPT fitting at bottom

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Click Here For Specification

Activation Turn On Options:
EFD/Combo= For combination Eye/Face Drench Shower. First Stage 4 GPM turn on (1/2 kW power) Eye/Face, Second Stage 15 GPM turn on (full kW power) Drench Shower.
DS= For Drench Shower only. (min turn on 12 GPM)

Thermostatic Options:
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 100°)

Enclosure Option:
Nema 4= Waterproof enclosure 42"x36"x12", panel 42"x34.2"

Priced for EX1260T12 EFD/Combo S (EFD/Combo, Sanitation setting 180°)