EEMAX07

Eemax EX2412T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX2412T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX2412T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 120V
• KW 2.4kW
• Amps 20A
• Rise at 0.5 GPM 33°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX2412T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

•Units can be used at 208V with 25% reduced output.
•The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

Thermostatic Spec Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)

Priced for EX2412TS

EEMAX08

Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Specifications:
• Volts 120V
• KW 3.0kW
• Amps 25A
• Rise at 0.5 GPM 41°F
• Rise at 0.75 GPM 27°F
• Wire Size AWG 10
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert
• Connections 1/2" compression

Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

TS- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)

Priced for EX3012TS

EEMAX09

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 120V
• KW 3.5kW
• Amps 29A
• Rise at 0.5 GPM 48°F
• Rise at 0.75 GPM 32°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

TS- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)

Priced for EX3512TS

EEMAX10

Eemax EX55T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX55T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX55T "Thermostatic" Electric Tankless Water Heater Specifications:
• Volts 240V
• KW 5.5kW
• Amps 23A
• Rise at 0.5 GPM 75°F
• Rise at 0.75 GPM 50°F
• Rise at 1.0 GPM 38°F
• Rise at 1.5 GPM 25°F
• Wire Size AWG 10
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX55T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX55TS

EEMAX11

Eemax EX65T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX65T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX65T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 240V
• KW 6.5kW
• Amps 27A
• Rise at 0.5 GPM 89°F
• Rise at 0.75 GPM 59°F
• Rise at 1.0 GPM 44°F
• Rise at 1.5 GPM 30°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX65T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

TS- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX65TS

EEMAX12

Eemax EX75T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX75T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX75T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 240V
• KW 7.5kW
• Amps 32A
• Rise at 0.75 GPM 68°F
• Rise at 1.0 GPM 51°F
• Rise at 1.5 GPM 34°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX75T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

TS- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX75TS

EEMAX13

Eemax EX95T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX95T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX95T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 240V
• KW 9.5kW
• Amps 40A
• Rise at 0.75 GPM 87°F
• Rise at 1.0 GPM 65°F
• Rise at 1.5 GPM 43°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX95T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX95TS

EEMAX14

Eemax EX8208T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX8208T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX8208T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 208V
• KW 8.3kW
• Amps 40A
• Rise at 0.75 GPM 76°F
• Rise at 1.0 GPM 57°F
• Rise at 1.5 GPM 38°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX8208T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

EEMAX15

Eemax EX60T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX60T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX60T "Thermostatic" Electric Tankless Water Heater Specifications:
• Volts 277V
• KW 6.0kW
• Amps 22A
• Rise at 0.5 GPM 81°F
• Rise at 0.75 GPM 55°F
• Rise at 1.0 GPM 41°F
• Rise at 1.5 GPM 27°F
• Wire Size AWG 10
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX60T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX60TS

EEMAX16

Eemax EX80T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX80T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX80T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 277V
• KW 8.0kW
• Amps 29A
• Rise at 0.75 GPM 73°F
• Rise at 1.0 GPM 55°F
• Rise at 1.5 GPM 36°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX80T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

•Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX80TS

EEMAX17

Eemax EX90T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX90T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX90T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 277V
• KW 9.0kW
• Amps 33A
• Rise at 0.75 GPM 82°F
• Rise at 1.0 GPM 61°F
• Rise at 1.5 GPM 41°F
• Rise at 2.0 GPM 31°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX90T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.


Click Here For Specification

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX90TS

EEMAX18

Eemax EX100T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX100T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX100T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 277V
• KW 10.0kW
• Amps 36A
• Rise at 0.75 GPM 91°F
• Rise at 1.0 GPM 68°F
• Rise at 1.5 GPM 46°F
• Rise at 2.0 GPM 34°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX100T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX100TS

EEMAX19

Eemax EX120TC "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX120TC "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX120TC "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 240V
• KW 11.5kW
• Amps 48A
• Rise at 0.75 GPM 104°F
• Rise at 1.0 GPM 89°F
• Rise at 1.5 GPM 52°F
• Rise at 2.0 GPM 39°F
• Wire Size AWG 6
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX120TC "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX120TCS