EemaX Tankless Point Of Use Electric Water Heaters: Welcome To DiscountTankless.net

EemaX Tankless Point Of Use Electric Water Heaters
Welcome To DiscountTankless.net:Tankless Electric Hot Water Heaters:EemaX Tankless Point Of Use Electric Water Heaters

View All EemaX

EemaX Sizing Selector (pdf)

EEMAX07
Eemax Thermostatic Electric Tankless Water Heater EX2412T
$283.00
Additional Info

The Eemax EX2412T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX2412T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX2412T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX2412T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 120V
• KW 2.4kW
• Amps 20A
• Rise at 0.5 GPM 33°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX2412T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

Thermostatic Spec Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)

Priced for EX2412TS

EEMAX08
Eemax Thermostatic Electric Tankless Water Heater EX3012T
$283.00
Additional Info
The Eemax EX3012T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Specifications:
• Volts 120V
• KW 3.0kW
• Amps 25A
• Rise at 0.5 GPM 41°F
• Rise at 0.75 GPM 27°F
• Wire Size AWG 10
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert
• Connections 1/2" compression

Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

Click Here For Specification

TS- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)

Priced for EX3012TS

EEMAX09
Eemax Thermostatic Electric Tankless Water Heater EX3512T
$283.00
Additional Info
The Eemax EX3512T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 120V
• KW 3.5kW
• Amps 29A
• Rise at 0.5 GPM 48°F
• Rise at 0.75 GPM 32°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

Click Here For Specification

TS- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)

Priced for EX3512TS

EEMAX10
Eemax Thermostatic Electric Tankless Water Heater EX55T
$283.00
Additional Info
The Eemax EX55T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX55T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX55T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX55T "Thermostatic" Electric Tankless Water Heater Specifications:
• Volts 240V
• KW 5.5kW
• Amps 23A
• Rise at 0.5 GPM 75°F
• Rise at 0.75 GPM 50°F
• Rise at 1.0 GPM 38°F
• Rise at 1.5 GPM 25°F
• Wire Size AWG 10
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX55T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX55TS

EEMAX11
Eemax Thermostatic Electric Tankless Water Heater EX65T
$283.00
Additional Info
The Eemax EX65T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX65T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX65T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX65T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 240V
• KW 6.5kW
• Amps 27A
• Rise at 0.5 GPM 89°F
• Rise at 0.75 GPM 59°F
• Rise at 1.0 GPM 44°F
• Rise at 1.5 GPM 30°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX65T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

Click Here For Specification

TS- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX65TS

EEMAX12
Eemax Thermostatic Electric Tankless Water Heater EX75T
$283.00
Additional Info
The Eemax EX75T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX75T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX75T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX75T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 240V
• KW 7.5kW
• Amps 32A
• Rise at 0.75 GPM 68°F
• Rise at 1.0 GPM 51°F
• Rise at 1.5 GPM 34°F
• Wire Size AWG 8
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX75T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

EEMAX13
Eemax Thermostatic Electric Tankless Water Heater EX95T
$283.00
Additional Info
The Eemax EX95T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX95T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX95T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX95T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 240V
• KW 9.5kW
• Amps 40A
• Rise at 0.75 GPM 87°F
• Rise at 1.0 GPM 65°F
• Rise at 1.5 GPM 43°F
• Wire Size AWG 8
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX95T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements

Priced for EX95TS

EEMAX14
Eemax Thermostatic Electric Tankless Water Heater EX8208T
$283.00
Additional Info
The Eemax EX8208T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX8208T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX8208T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX8208T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 208V
• KW 8.3kW
• Amps 40A
• Rise at 0.75 GPM 76°F
• Rise at 1.0 GPM 57°F
• Rise at 1.5 GPM 38°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX8208T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

EEMAX15
Eemax Thermostatic Electric Tankless Water Heater EX60T
$283.00
Additional Info
The Eemax EX60T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX60T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX60T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX60T "Thermostatic" Electric Tankless Water Heater Specifications:
• Volts 277V
• KW 6.0kW
• Amps 22A
• Rise at 0.5 GPM 81°F
• Rise at 0.75 GPM 55°F
• Rise at 1.0 GPM 41°F
• Rise at 1.5 GPM 27°F
• Wire Size AWG 10
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX60T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

Click Here For Specification

Priced for EX60TS

EEMAX16
Eemax Thermostatic Electric Tankless Water Heater EX80T
$283.00
Additional Info
The Eemax EX80T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX80T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX80T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX80T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 277V
• KW 8.0kW
• Amps 29A
• Rise at 0.75 GPM 73°F
• Rise at 1.0 GPM 55°F
• Rise at 1.5 GPM 36°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX80T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

Click Here For Specification

Priced for EX80TS

EEMAX17
Eemax Thermostatic Electric Tankless Water Heater EX90T
$283.00
Additional Info
The Eemax EX90T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX90T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX90T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX90T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 277V
• KW 9.0kW
• Amps 33A
• Rise at 0.75 GPM 82°F
• Rise at 1.0 GPM 61°F
• Rise at 1.5 GPM 41°F
• Rise at 2.0 GPM 31°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX90T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

Priced for EX90TS

EEMAX18
Eemax Thermostatic Electric Tankless Water Heater EX100T
$283.00
Additional Info
The Eemax EX100T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX100T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX100T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX100T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 277V
• KW 10.0kW
• Amps 36A
• Rise at 0.75 GPM 91°F
• Rise at 1.0 GPM 68°F
• Rise at 1.5 GPM 46°F
• Rise at 2.0 GPM 34°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX100T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

Priced for EX100TS

EEMAX20
Eemax Flow Controlled Electric Tankless Water Heater EX35T
$179.00
Additional Info
The Eemax EX35T "Flow Control" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX35 "Flow Control" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX35T "Flow Control" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX35T "Flow Control" Electric Tankless Water Heater Specifications:
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 240V
• KW 3.5kW
• Amps 14.6A
• Rise at 1.0 GPM 24°F
• Rise at .75 GPM 32°F
• Rise at .5 GPM 48°F
• Wire Size AWG - 10
• Element - Replaceable cartridge insert

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Specification Options:
SL=Single Lav-3/8" adapter supplied
FC=Flex Connector-Steel braided flex connector-
FC 176-3/8Cx1/2FIP-16" fct.supply or
FC 177-3/8Cx3/8C-16" fct.supply

Priced for EX35T

EEMAX21
Eemax Flow Controlled Electric Tankless Water Heater EX55
$179.00
Additional Info
The Eemax EX55 "Flow Control" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX55 "Flow Control" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX55 "Flow Control" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Hand Set Shower (.7 - 2 GPM)

Eemax EX55 "Flow Control" Electric Tankless Water Heater Specifications:
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 240V
• KW 5.5kW
• Amps 23A
• Rise at .5 GPM 75°F
• Rise at .75 GPM 50°F
• Rise at 1.0 GPM 38°F
• Rise at 1.5 GPM 25°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Specification Options:
SL=Single Lav-3/8" adapter supplied
DL=Dual Lavs-Supplied with two faucet aerators
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for EX55SL

EEMAX22
Eemax Flow Controlled Electric Tankless Water Heater EX65
$179.00
Additional Info
The Eemax EX65 "Flow Controlled" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX65 "Flow Controlled" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX65 "Flow Controlled" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX65 "Flow Controlled" Electric Tankless Water Heater Specifications:
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 240V
• KW 6.5kW
• Amps 27A
• Rise at .5 GPM 89°F
• Rise at .75 GPM 59°F
• Rise at 1.0 GPM - 44°F
• Rise at 1.5 GPM - 30°F
• Rise at 2.0 GPM 22°F
• Wire Size AWG 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Priced for EX65SL

EEMAX23
Eemax Flow Controlled Electric Tankless Water Heater EX75
$179.00
Additional Info
The Eemax EX75 "Flow Controlled" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX75 "Flow Controlled" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX75 "Flow Controlled" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX75 "Flow Controlled" Electric Tankless Water Heater Specifications:
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 240V
• KW 7.5kW
• Amps 32A
• Rise at .75 GPM 68°F
• Rise at 1.0 GPM - 51°F
• Rise at 1.5 GPM - 34°F
• Rise at 2.0 GPM 26°F
• Wire Size AWG 8
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

EEMAX24
Eemax Flow Controlled Electric Tankless Water Heater EX95
$179.00
Additional Info
The Eemax EX95 "Flow Controlled" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX95 "Flow Controlled" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX95 "Flow Controlled" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX95 "Flow Controlled" Electric Tankless Water Heater Specifications:
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 240V
• KW 9.5kW
• Amps 40A
• Rise at .75 GPM 87°F
• Rise at 1.0 GPM - 65°F
• Rise at 1.5 GPM - 43°F
• Rise at 2.0 GPM 32°F
• Wire Size AWG 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Specification Options:
DL=Dual Lavs-Supplied with two faucet aerators
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for EX95DL

EEMAX25
Eemax Flow Controlled Electric Tankless Water Heater EX8208
$179.00
Additional Info
The Eemax EX8208 "Flow Controlled" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX8208 "Flow Controlled" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX8208 "Flow Controlled" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX8208 "Flow Controlled" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 208V
• KW 8.3kW
• Amps 40A
• Rise at .75 GPM 87°F
• Rise at 1.0 GPM - 57°F
• Rise at 1.5 GPM - 38°F
• Rise at 2.0 GPM 28°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert

Click Here For Specifications

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Specification Options:
DL=Dual Lavs-Supplied with two faucet aerators
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for EX8208DL

EEMAX26
Eemax Flow Controlled Electric Tankless Water Heater EX60
$179.00
Additional Info
The Eemax EX60 "Flow Controlled" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX60 "Flow Controlled" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX60 "Flow Controlled" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX60 "Flow Controlled" Electric Tankless Water Heater Specifications:
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 277V
• KW 6.0kW
• Amps 22A
• Rise at .5 GPM 82°F
• Rise at .75 GPM 55°F
• Rise at 1.0 GPM - 41°F
• Rise at 1.5 GPM - 27°F
• Rise at 2.0 GPM 20°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Priced for EX60SL

EEMAX27
Eemax Flow Controlled Electric Tankless Water Heater EX80
$179.00
Additional Info
The Eemax EX80 "Flow Controlled" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX80 "Flow Controlled" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX80 "Flow Controlled" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX80 "Flow Controlled" Electric Tankless Water Heater Specifications:
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 277V
• KW 8.0kW
• Amps 29A
• Rise at .75 GPM 73°F
• Rise at 1.0 GPM - 55°F
• Rise at 1.5 GPM - 36°F
• Rise at 2.0 GPM 27°F
• Wire Size AWG 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert

Click Here For Specifications

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Specification Options:
DL=Dual Lavs-Supplied with two faucet aerators
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for EX80DL

EEMAX28
Eemax Flow Controlled Electric Tankless Water Heater EX90
$179.00
Additional Info
The Eemax EX90 "Flow Controlled" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX90 "Flow Controlled" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX90 "Flow Controlled" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX90 "Flow Controlled" Electric Tankless Water Heater Specifications:
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 277V
• KW 9.0kW
• Amps 33A
• Rise at .75 GPM 82°F
• Rise at 1.0 GPM - 61°F
• Rise at 1.5 GPM - 41°F
• Rise at 2.0 GPM 31°F
• Wire Size AWG 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert

Click Here For Specifications

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Specification Options:
DL=Dual Lavs-Supplied with two faucet aerators
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for EX90DL

EEMAX29
Eemax Flow Controlled Electric Tankless Water Heater EX100
$179.00
Additional Info
The Eemax EX100 "Flow Controlled" Electric Tankless Water Heater. Recommended cold water feed. Turn on flow .7 GPM, max 2 GPM.

Eemax EX100 "Flow Controlled" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory. • Mounts on wall at point-of-use.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX100 "Flow Controlled" Electric Tankless Water Heater Applications:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Hand wash Sinks (DL)
• Hand Set Shower (.7 - 2 GPM)

Eemax EX100 "Flow Controlled" Electric Tankless Water Heater Specifications:
• EX = Bottom Water Connection, 1/2" compression fittings
• Volts 277V
• KW 10.0kW
• Amps 36A
• Rise at .75 GPM 91°F
• Rise at 1.0 GPM - 68°F
• Rise at 1.5 GPM - 46°F
• Rise at 2.0 GPM 34°F
• Wire Size AWG 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert

Plumbing Orientation:
EX=Bottom Water Connections 1/2" (5/8"OD) Compression Fittings
SP=Top Water Connections 1/2" (5/8"OD) Compression Fittings

Specification Options:
DL=Dual Lavs-Supplied with two faucet aerators
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for EX100DL

EEMAX30
Eemax Single Point Electric Tankless Water Heaters SP2412
$173.00
Additional Info

The Eemax SP2412 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP2412 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP2412 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP2412 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 120V
• KW - 2.4kW
• Amps - 20A
• Rise at 0.5 GPM - 33°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Connections 3/8" compression at top of unit

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP2412FC176

EEMAX31
Eemax Single Point Electric Tankless Water Heaters SP3012
$173.00
Additional Info

The Eemax SP3012 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP3012 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP3012 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP3012 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 120V
• KW - 3.0kW
• Amps - 25A
• Rise at 0.5 GPM - 41°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Connections - 3/8" compression at top of unit

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP3012FC176

EEMAX32
Eemax Single Point Electric Tankless Water Heaters SP3512
$173.00
Additional Info

The Eemax SP3512 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP3512 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP3512 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP3512 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 120V
• KW - 3.5kW
• Amps - 29A
• Rise at 0.5 GPM - 48°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Pipe-Fittings - 3/8" compression at top of unit

• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start procedures up must be observed.

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP3512FC176

EEMAX33
Eemax Single Point Electric Tankless Water Heaters SP3208
$173.00
Additional Info

The Eemax SP3208 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP3208 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP3208 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP3208 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 208V
• KW - 3.0kW
• Amps - 14.4A
• Rise at 0.5 GPM - 41°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Connections: 3/8" compression at top of unit

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP3208FC176

EEMAX34
Eemax Single Point Electric Tankless Water Heaters SP4208
$173.00
Additional Info

The Eemax SP4208 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP4208 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out. •
Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP4208 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP4208 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 208V
• KW - 4.1kW
• Amps - 19.7A
• Rise at 0.5 GPM - 56°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Connections: 3/8" compression at top of unit

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP4208FC176

EEMAX35
Eemax Single Point Electric Tankless Water Heaters SP35
$173.00
Additional Info

The Eemax SP35 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP35 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP35 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP35 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 240V
• KW - 3.5kW
• Amps - 14.6A
• Rise at 0.5 GPM - 48°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Connections: 3/8" compression at top of unit

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP35FC176

EEMAX36
Eemax Single Point Electric Tankless Water Heaters SP55
$173.00
Additional Info

The Eemax SP55 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP55 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out. Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP55 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP55 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 240V
• KW - 5.5kW
• Amps - 22.9A
• Rise at 0.5 GPM - 75°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Connections: 3/8" compression at top of unit

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP55FC176

EEMAX37
Eemax Single Point Electric Tankless Water Heaters SP3277
$173.00
Additional Info

The Eemax SP3277 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP3277 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP3277 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP3277 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 277V
• KW - 33.0kW
• Amps - 10.8A
• Rise at 0.5 GPM - 41°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Connections: 3/8" compression at top of unit

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP3277FC176

EEMAX38
Eemax Single Point Electric Tankless Water Heaters SP4277
$173.00
Additional Info

The Eemax SP4277 "Single Point" Electric Tankless Water Heater to serve one commercial type sink as found in public hand washing areas, modular buildings and offices, strip malls, service stations and concession stands.

Eemax SP4277 "Single Point" Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to lavatory - integral 3/8" compression fittings on top (no sweat connections). Mounts on wall at point-of-use.
• Flow Restrictor Faucet Aerator - with excellent spray pattern supplied with unit.
• Hands Free - sensor and metering faucet compatible.
• Prevents Legionella Bacteria Growth
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"
• Reduces Calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element
• Complies with handicap requirements.

Eemax SP4277 "Single Point" Electric Tankless Water Heater Applications:
• Shopping Malls
• Office and Tenant Spaces
• Commercial Buildings (restaurants, etc.)
• Modular Buildings/Modular Offices
• Public Hand Washings
• Service Stations
• Schools
• Concession Stands
• Various "Point-Of-Use" Needs

Eemax SP4277 "Single Point" Electric Tankless Water Heater Specifications:
• Volts - 277V
• KW - 4.1kW
• Amps - 14.8A
• Rise at 0.5 GPM - 56°F
• Wire Size AWG - 10
• Dimensions - 10.75" x 5.25" x 2.125"
• Weight - 3 lbs
• Element - Replaceable cartridge insert
• Connections: 3/8" compression at top of unit

Click Here For Specifications

Spec Options:
FC=Flex Connector-Steel braided flex connector-
176-3/8Cx1/2FIP-16" fct.supply or
177-3/8Cx3/8C-16" fct.supply

Priced for SP4277FC176

EEMAX40
Eemax Mini Tank Electric Water Heaters EMT2.5
$151.61
Additional Info
The Eemax EMT2.5 "Mini-Tank" Electric Water Heater save water by eliminating the wait for hot water to reach the tap. Simply tap into the cold line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eemax heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater.

Eemax EMT2.5 "Mini-Tank" Electric Water Heater Quality Features:
• Glass-lined tank for longer life.
• Lightweight and compact.
• Temperature/pressure relief valve included.
• Plugs into standard 110 volt outlet.

Eemax EMT2.5 "Mini-Tank" Electric Water Heater Applications:
• Homes, cottages, kitchenettes
• Stores and offices
• RVs and mobile homes
• Restaurants and hotels
• Service stations
• Warehouses and factories
• Boats

Eemax EMT2.5 "Mini-Tank" Electric Water Heater Specifications:
• Tank Volume 2.5 gallons
• Volts 110/120V
• Amps 10A
• Phase - single
• Heating Capacity 1200W
• Dimensions - 17-5/16" x 11-7/16" x 11-7/16"
• Temperatures 65-155°F
• Operating Pressure 150psi
• Recovery Time (60-150°F) 25 minutes
• Weight 18 lbs
• Water Connections 1/2" NPT
•Operating pressure minimum: 25psi
• Operating pressure maximum: 150psi

Click Here For Specifications

EMT2.5

EEMAX41
Eemax Mini Tank Electric Tankless Water Heaters EMT4
$193.05
Additional Info
The Eemax EMT4 "Mini-Tank" Electric Water Heater saves water by eliminating the wait for hot water to reach the tap. Simply tap into the cold line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eemax heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater.

Eemax EMT4 "Mini-Tank" Electric Water Heater Quality Features:
• Glass-lined tank for longer life.
• Lightweight and compact.
• Temperature/pressure relief valve included.
• Plugs into standard 110 volt outlet.

Eemax EMT4 "Mini-Tank" Electric Water Heater Applications:
• Homes, cottages, kitchenettes
• Stores and offices
• RVs and mobile homes
• Restaurants and hotels
• Service stations
• Warehouses and factories
• Boats

Eemax EMT4 "Mini-Tank" Electric Water Heater Specifications:
• Tank Volume 4 gallons
• Volts 110/120V
• Amps 10A
• Phase - Single
• Heating Capacity 1200W
• Dimensions 18-1/2" x 11-7/16" x 11-7/16"
• Temperatures 65-155°F
• Operating Pressure 150psi
• Recovery Time (60-150°F) 45 minutes
• Weight 19 lbs
• Connections: 1/2" NPT
• Operating pressure minimum: 25psi
• Operating pressure maximum: 150psi

EEMAX42
Eemax Mini Tank Electric Tankless Water Heaters EMT6
$246.69
Additional Info
The Eemax EMT6 "Mini-Tank" Electric Water Heater saves water by eliminating the wait for hot water to reach the tap. Simply tap into the cold line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eemax heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater.

Eemax EMT6 "Mini-Tank" Electric Water Heater Quality Features:
• Glass-lined tank for longer life.
• Lightweight and compact.
• Temperature/pressure relief valve included.
• 6 Gallon requires direct hard wiring.

Eemax EMT6 "Mini-Tank" Electric Water Heater Applications:
• Homes, cottages, kitchenettes
• Stores and offices
• RVs and mobile homes
• Restaurants and hotels
• Service stations
• Warehouses and factories
• Boats

Eemax EMT6 "Mini-Tank" Electric Water Heater Specifications:
• Tank Volume 6 gallons
• Volts 110/120V
• Amps 16.7A
• Phase - single
• Heating Capacity 1500W
• Dimensions 17-5/16" x 11-7/16" x 11-7/16"
• Temperatures 54-155°F
• Operating Pressure150psi
• Recovery Time (60-150°F) 55 minutes
• Weight 38 lbs
• Connections: 3/4" NPT
• Operating pressure minimum: 25psi
• Operating pressure maximum: 150psi

Click Here For Specifications

EMT6

EEMAX52
Eemax Digital Readout Electric Tankless Water Heater EX2412T DR
$444.49
Additional Info

The Eemax EX2412T DR "Digital Readout" External Micro Processing Temperature Control Electric Tankless Water Heater.

To serve as a booster, eliminating long pipe runs. Applications where precise temperature control is essential. Anti scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard .7 GPM turn on.

Applications (all models):
• Photo Processing
• Schools
• Nursing Homes
• Laboratories
• Showers
• Boosters(to 180° sanitation)
• Anti scald Protection
• Residential

Eemax Electric "Digital Readout" Tankless Water Heater (Single Module)
Specifications:
• For hot or cold water feed
• Size: 10"x9"x3"
• External thermostatic control and digital temperature readout
• kw: 2.4
• Volts: 120V
• Amps: 20A
• Recommended wire size: 10AWG
• Temp rise at 1.0 GPM: 16°F
• Temp rise at 2.0 GPM: 8°F
• Temp rise at 3.0 GPM: 5°F
• Weight 6.5 lbs

Click Here For Specifications

Thermostatic Specification Options:
S= sanitation setting 180°
P= photo setting ambient to 100°

Priced for EX2412T DR S (sanitation setting 180°)

EEMAX53
Eemax Digital Readout Electric Tankless Water Heater EX3012T DR
$444.49
Additional Info

The Eemax EX3012T DR "Digital Readout" External Micro Processing Temperature Control Electric Tankless Water Heater

To serve as a booster, eliminating long pipe runs. Applications where precise temperature control is essential. Anti scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard .7 GPM turn on.

Applications (all models):
• Photo Processing
• Schools
• Nursing Homes
• Laboratories
• Showers
• Boosters(to 180° sanitation)
• Anti scald Protection
• Residential

Eemax Electric "Digital Readout" Tankless Water Heater (Single Module)
Specifications:
• For hot or cold water feed
• Size: 10"x9"x3"
• External thermostatic control and digital temperature readout
• kw: 3.0
• Volts: 120V
• Amps: 25A
• Recommended wire size: 10AWG
• Temp rise at 1.0 GPM: 20°F
• Temp rise at 2.0 GPM: 10°F
• Temp rise at 3.0 GPM: 7°F
• Weight 6.5 lbs

Click Here For Specifications

Thermostatic Specification Options:
S= sanitation setting 180°
P= photo setting ambient to 100°

Priced for EX3012T DR S (sanitation setting 180°)

EEMAX54
Eemax Digital Readout Electric Tankless Water Heater EX3512T DR
$457.49
Additional Info

The Eemax EX3512T DR "Digital Readout" External Micro Processing Temperature Control Electric Tankless Water Heater.

To serve as a booster, eliminating long pipe runs. Applications where precise temperature control is essential. Anti scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard .7 GPM turn on.

Applications (all models):
• Photo Processing
• Schools
• Nursing Homes
• Laboratories
• Showers
• Boosters(to 180° sanitation)
• Anti scald Protection
• Residential

Eemax Electric "Digital Readout" Tankless Water Heater (Single Module)
Specifications:
• For hot or cold water feed
• Size: 10"x9"x3"
• External thermostatic control and digital temperature readout
• kw: 3.5
• Volts: 120V
• Amps: 29A
• Recommended wire size: 10AWG
• Temp rise at 1.0 GPM: 24°F
• Temp rise at 2.0 GPM: 12°F
• Temp rise at 3.0 GPM: 8°F
• Weight 6.5 lbs

Click Here For Specifications

Thermostatic Specification Options:
S= sanitation setting 180°
P= photo setting ambient to 100°

Priced for EX3512T DR S (sanitation setting 180°)

EEMAX55
Eemax Digital Readout Electric Tankless Water Heater EX8208T DR
$444.49
Additional Info

The Eemax EX8208T DR "Digital Readout" External Micro Processing Temperature Control Electric Tankless Water Heater.

To serve as a booster, eliminating long pipe runs. Applications where precise temperature control is essential Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard .7 GPM turn on.

Applications (all models):
• Photo Processing
• Schools
• Nursing Homes
• Laboratories
• Showers
• Boosters(to 180° sanitation)
• Anti scald Protection
• Residential

Eemax Electric "Digital Readout" Tankless Water Heater (Single Module)
Specifications:
• For hot or cold water feed
• Size: 10"x9"x3"
• External thermostatic control and digital temperature readout
• kw: 8.3
• Volts: 208V
• Amps: 40A
• Recommended wire size: 8AWG
• Temp rise at 1.0 GPM: 57 °F
• Temp rise at 2.0 GPM: 28°F
• Temp rise at 3.0 GPM: 19°F
• Weight 6.5 lbs

Click Here For Specifications