EEMAX01

The Eemax EX280T2T Series Three Electric Tankless Water Heater.Whole house unit for multiple showers. Turns on in stages, based upon water flow rate. Equipped with microprocessing temp control with staged heating modules.

Eemax EX280T2T Series Three Electric Tankless Water Heater Features:
• On Demand Hot Water - no delay.
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss).
• Continuous Hot Water - no storage capacity to run out.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC"
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 12" x 12" x 3.5"
• Reduces Calcification.
• Field Serviceable Element - replaceable cartridge element

Eemax EX280T2T Series Three Electric Tankless Water Heater Applications:
• Engineered to turn on in stages
• Uses energy for amount of flow
• Sophisticated thermostat delivers precise outlet temperature
• Cold or Hot water feed

Cutaway View

Eemax EX280T2T Series Three Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 12 lbs
• Volts 240V
• KW 28.5kW
• Amps 120(3x40)A
• Rise at 2 GPM 96°F
• Rise at 3 GPM 65°F
• Rise at 4 GPM 47°F
• Wire Size AWG 8
• Element - Triple replaceable Ni Chrome cartridge element inserts
• Connections: 5/8" i.d. compression (1/2" copper pipe) at bottom of unit.
• Operating pressure minimum: 25psi
• Operating pressure maximum: 150psi
• The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Click Here For Specification


EX280T2T

FLOWAIDE02

System Descaler Solution Improves Tankless Water Heater Efficiency

Contents

AMHEAT03

Specification Sheets

Warranty

Install Data

MODEL ADK 3

NORITZ03

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

RECENTLY REDUCED
(WHILE THEY LAST)

236,000 BTU'S

Click Here For Venting Materials For This Heater

N-084M LP ONLY!!!

The N-084M is Quick-Connect or multiple unit system capable and is best suited for light commercial and large residential use. This highly efficient heater provides a continual supply of hot water and minimizing emissions while saving energy and space. Its Q-TEC valve system maintains a constant temperature and the digital control panel allows for precise control of the water temperature.

Remote Controller
Controlling your tankless gas water heater has never been easier. The multi-task remote controller utilizes advanced technology that allows you to adjust water temperature and other settings with the touch of your fingertip.

Quick-Connect Multi-System
The N-931M model has the capability of installing two units together utilizing only the Quick-Connect Cord. Two units (installed between 2-18 inches of each other) may connected together by the Quick-Connect Cord be controlled by a single digital remote controller.

To view Specifications Click Here
To view Installation Manual Click Here

TAKAGI01

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

TAKAGI21

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Tankless Water Heater T-K3

Includes Wall Mount System.
(No Additional Purchase Required).

Picture Shown with OPTIONAL TK- TV 10 Direct Vent Kit. If using this heater in a direct vent application, you must order the Optional TK-TV 10 offered below. If using open air combustion there is no need to purchase this item.

New Features

Easy-Link Multi-System:

LINK UP TO 4 T-K3 HEATERS TOGETHER FOR A REMARKABLE 28 GALLONS PER MINUTE!

• --Maximum 4 units (without the need for a multi-unit controller like the TM-RE20)
• --TM-RE10 is the remote control for the T-K3. It is optional and not necessary for the multi unit system
• --Easy-Link wire comes with each heater

8 temperature settings with dip switches

• --104°F, 113°F, 122°F(default), 131°F, 140°F, 158°F, 176°F and 185°F

Air-Fuel Ratio Rod

• --Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

• --In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to -22 ºF in a wind-free environment

Natural Gas Input	Min. 11,000 Btu	Max. 199,000 Btu
LPG Input	Min. 11,000 Btu	Max. 199,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Natural Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
LP Gas Pressure Inlet	Min. 8" WC	Max. 14" WC
Manifold Pressure	Natural 2.5" WC	Propane 4.4" WC
Weight	40 lbs.
Dimensions	20.5" x 13.8" x 8.5"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V
Water Flow Rate	Min. 0.5 GPM Max 7GPM
Outlet Water Temperature	Min. 104 Degrees F--Max 185 Degrees F

Click on the links below for more information:

The following links require Adobe Acrobat.
To download the latest version, click here!

KIT01

Click Here For An Installed View Of This Kit.

Click here for all 4" Stainless Venting.

ISO1

BUY 2-5 PAY JUST $78.50 EACH

BUY 6-11 PAY JUST $76.50 EACH

BUY 12 OR MORE PAY JUST $72.50 EACH

*Volume Price Displayed In Cart.

PALOMA01

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Do you need a Paloma that supports simultaneous showers? Fill your new whirlpool, give you a shower and still provide consistent 120o F water to your dishwasher? Fill your 80 gallon whirlpool, then continue to turn out 200 more gallons of bathing water in the very same hour? The 28-R is Whole House Hot Water solution for most homes. It will support two simultaneous showers in the dead of a northern winter’s night…and three showers in January in the deep sunbelt…with even greater performance the rest of the year. This model is supplied with a 120 volt power cord. Small Capacity to Big Capacity (19,000 -199,900 Btu/Hr) 28-R Extreme Winter Shower Performance Simultaneous Showers Supported GPM The Deep Sunbelt (60º inlet) 3 7.6 The Far North (40º inlet) 2 5.2 This Guide indicates 28-R performance at the coldest point in the year. A standard shower is 2.5 GPM at 104o F. Check with your water supplier for actual local conditions. The 28-R features top-of-the-line features such as: Built In Back Flow Preventer (Included)

Up to two scald-preventive priority Bath Controllers for bathroom use (optional)

Paloma’s exclusive sensing burner and ICAD Safety System to optimize combustion and shut the unit down in case of raised levels of carbon monoxide (indoor units only)

Extensive diagnostics and error display

Run your Paloma Tankless SOLO, or combine two units together for a Tankless DUO with 2X the perform. DUOnex™ Cable sold seperately and shown as a related item.

More Features

• Endless hot water on demand • Energy saving design • Energy efficiency - 30% more efficient than tank type water heaters • Compact, space saving design • Self-diagnostic program • Digital remote control for convenience, comfort, and ease of maintenance • Remote control displays adjustable temperature settings • Intelligent electronic controls designed to increaste energy efficiency and safety • Exclusive film wrap overheat limiter

• Indoor model uses 4" Category III stainless steel venting material • May be installed as part of a circulating water system • USC1-117 (Bath remote) waterproof remote control is included (120º F maximum setting) • Optional remote controls available • Built-in electric blower on all models • Low NOx emissions meet SCAQMD rule 1121 requirements • Maybe used for light commercial use

•Factory set maximum temperature is 120º F
• For installations above 3,280 feet the connector to the PC board must be replaced. Consult
factory or your supplier for details.

Warranty
• 10 Year Limited Warranty on Heat Exchanger in residential applications.
• 3 Year Limited Warranty on Parts in residential applications.
• Information on commercial use warranty, ask a Paloma dealer near you.

Note: These units are designed to meet or exceed ANSI (American National Standards Institute) requirements and have been tested according to D.O.E. test procedures and meed or exceed the energy efficiency requirements of NAECA, ASHRAE standard 90, BOCA Code and all state energy efficiency performance criteria for energy consuming appliances.

Specifications

			Indoor Models		Outdoor Models
	Natural Gas Model No.		PH-28RIFSN		PH-28RIFSN
	LP Gas Model No.		PH-28RIFSP		PH-28RIFSN
	Rated Gas Input (Btu/Hr.)		19,000 (minimum) 199,900 (max.) Modulating
	Dimensions (Inches)		14-7/8 (W) x 25-3/8 (H) x 11-1/8 (D)
	Net Weight (lbs.)		55
	Working Water Pressure		14 psi (minimum); 150 psi (maximum)
	Water Flow Rate		0.66 GPM (minimum) 7.4 GPM (maximum) (23 psi)
	Gas Connection		3/4" NPT Female (With Supplied Gas Shutoff Valve)
	Water Connection		3/4 NPT Male
	Vent Size		4" Special Venting		N/A (Outdoor Installation)
	Efficiency Rating		84%
	Energy Factor		0.82
	Electrical Rating		120 VAC/60 Hz, Less than 2 Amps

• PH-28 Spec Sheet (pdf)
  
  
• PH-28 Features (pdf)

PALOMA21

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!
ONLY NATURAL GAS IN STOCK

Paloma Industries is the #1 gas appliance manufacturer in Japan. The Paloma line incorporates TWO unique safety features not found on competitive tankless gas water heaters.

This model is supplied with a 120 volt power cord.
Small Capacity to Big Capacity
21,500~145,000 (LP: ~141,000) Btu/Hr

Features • Endless hot water on demand • Energy-saving design • Energy efficiency - 30% more efficient than tank-type water heaters • Compact, space-saving design • Paloma’s exclusive sensing burner and ICAD Safety System to optimize combustion and shut down the unit in case of raised levels of carbon monoxide (indoor units only) • Self-diagnostic program • Waterproof digital remote control for convenience, comfort, and ease of maintenance • Remote control displays adjustable temperature settings • Optional, additional remote controls available • Intelligent electronic controls designed to increase energy efficiency and safety • Exclusive film wrap overheat limiter • Indoor model uses 3" Category III stainless steel venting material • May be installed as part of a circulating water system • Built-in electric blower on all models • Low NOx emissions meet SCAQMD Rule 1121 requirements • Easy expansion with Solo/Duo System • Extensive diagnostics and error display

Residential Warranty • 10-Year Limited Warranty on Heat Exchanger • 3-Year Limited Warranty on Parts

Saftey Features

• First is the OXYGEN DEPLETION SENSING system (Indoor Model Only). Emissions from the sampling burner are constantly analyzed for carbon monoxide gas. If necessary, the fan speed is adjusted by the on board CPU. If the fan speed adjustments do not resolve the combustion problem, the burner will be turned off and a potentially dangerous situation avoided. An error message will be displayed.


• Second is the FILM TYPE OVERHEAT SENSING. This senses high temperature at all positions surrounding the combustion chamber. Other manufactures only sense at one point on the combustion chamber.

Two remote controls (one main control and one bath remote control) can be installed together. One Bath control comes with each unit.

Warranty

• 10 Year warranty on heat exchanger.
• 3 Year warranty on parts.

Note: These units are designed to meet or exceed ANSI (American National Standards Institute) requirements and have been tested according to D.O.E. test procedures and meed or exceed the energy efficiency requirements of NAECA, ASHRAE standard 90, BOCA Code and all state energy efficiency performance criteria for energy consuming appliances.

Specifications
		Indoor			Outdoor
Natural Gas Model Number Wholesale		PH-20R IFSN		PH-20R OFN
Natural Gas Model NumberRetail		N/A			N/A
LP Gas Model NumberWholesale		PH-20R IFSP		PH-20R OFN
LP Gas Model Number Retail		N/A			N/A
Rated Gas Input(BTUs/Hr.)		21,600 (minimum) 145,000 Nat. / 141,0000 LP (maximum) Modulating			21,600 (minimum) 141,0000 (maximum) Modulating
Dimensions (Inches)		13-3/4 (W) x 20-1/2 (H) x 5-5/6 (D)
Empty Net Weight (lbs.)		35
Working Water Pressure		14 psi (minimum); 150 psi (maximum)
Water Flow Rate		0.66 GPM (minimum) 5.3 GPM (maximum) (23 psi)
Gas Connection		3/4" NPT Female (With Supplied Gas Shutoff Valve)
Water Connection		3/4" NPT Male
Vent Size		3" Special Venting			N/A (Outdoor Installation)
Efficiency Rating		82%
Energy Factor		0.82
Electrical Rating		120 VAC/60 Hz, Less than 2 Amps
• Factory-set maximum temperature is 120 degrees F • For installations above 3,280 feet, the connector to the PC board must be replaced. Consult factory or your supplier for details.

TAKAGI23

Includes Wall Mount System.
(No Additional Purchase Required).

4 temperature settings with dip switches

• --113°F, 122°F(default), 140°F, 167°F

Air-Fuel Ratio Rod

• --Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

• --In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to 5ºF in a wind-free environment

Natural Gas Input	Min. 11,000 Btu	Max. 190,000 Btu
LPG Input	Min. 11,000 Btu	Max. 190,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Natural Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
LP Gas Pressure Inlet	Min. 8" WC	Max. 13.5 " WC
Manifold Pressure	Natural 2.8" WC	Propane3.1" WC
Weight	40 lbs.
Dimensions	20.5" x 13.8" x 8.5"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V
Water Flow Rate	Min. 0.5 GPM Max 7GPM
Outlet Water Temperature	Min. 104 Degrees F--Max 185 Degrees F

*This model will not accommodate the Easy-Link Multi-System. For Easy-Link Multi-System applications, you would use the T-K3 indoor unit along the TK-TV04 Outside Ventilating Cap.

Click on the links below for more information:

The following links require Adobe Acrobat.
To download the latest version, click here

(1) Hydronic & Domestic Heating
(2) Hydronic Heating Only
(3) Radiant & Domestic Heating
(4) Radiant Heating Only
(5) With Recirculation Only
(6) With Storage Tank
(7) Takagi Warranty Info & Registration
(8) Product Manual
(9) Product Specifications

STIEBEL03

FREE GROUND SHIPPING ON THIS
TANKLESS WATER HEATER!

The Tempra™ system completely replaces a conventional tank heater requiring considerably less space. Changing to a tankless system results in savings of 15 - 20% by only heating the water when it is needed. Set the knob on the front cover and enjoy water temperatures between 86°F (30°C) and 125°F (52°C).

AMHEAT07

The AH Series

AH27 / AH24 / AH21 SPECIFICATIONS

• Dimensions: 16” x 17” x 3.25”
• Shipping Weight: 16 lbs.
• Cover: Aluminum / Powder Coated
• Body/Heat Exchanger: Copper
• Element: 3 Brass Flange/Copper
• Pipe fittings: 3/4" NPT
• Activation flow rate: .25 gallon
• Operation Pressure: Min 25 PSI, Max 150

AH18 / AH16 / AH14 SPECIFICATIONS

• Dimensions: 16” x 13.5” x 3.25”
• Shipping Weight: 12 lbs.
• Cover: Aluminum / Powder Coated
• Body/Heat Exchanger: Copper
• Element: 3 Brass Flange/Copper
• Pipe fittings: 3/4" NPT
• Activation flow rate: .25 gallon
• Operation Pressure: Min 25 PSI, Max 150
  
  Electrical Specifications:

Model	KW @ 240V	Req.Breaker	Voltage	Max Power	Wire Gauge
AH-27	27	125 AMP	208/220/240	112.5 AMPS	# 2/2
AH-24	24	100 AMP	208/220/240	100 AMPS	# 2/2
AH-21	21	100 AMP	208/220/240	87.5 AMPS	# 2/2
AH-18	18	80 AMP	208/220/240	75 AMPS	# 4/2
AH-16	16	70 AMP	208/220/240	66 AMPS	# 4/2

TEMPERATURE RISE CHART

The chart below illustrates the maximum flow rate and temperature rise that can be achieved for the different AH Models. Most people shower at a temperature of between 98F and 104F. The chart is based on a 240 volt input voltage and maximum flow rates are listed for various incoming water temperature levels. If your home or business has less than 240 volt power (208v), your maximum flow rate will be lower. Simply look up your incoming water temperature and desired flow rate to determine your model choice. Don't forget that incoming water temperature may change throughout the year depending on the season.

MODEL SELECTOR

AMHEAT09

The AH Series

AH27 / AH24 / AH21 SPECIFICATIONS

• Dimensions: 16” x 17” x 3.25”
• Shipping Weight: 16 lbs.
• Cover: Aluminum / Powder Coated
• Body/Heat Exchanger: Copper
• Element: 3 Brass Flange/Copper
• Pipe fittings: 3/4" NPT
• Activation flow rate: .25 gallon
• Operation Pressure: Min 25 PSI, Max 150

AH18 / AH16 / AH14 SPECIFICATIONS

• Dimensions: 16” x 13.5” x 3.25”
• Shipping Weight: 12 lbs.
• Cover: Aluminum / Powder Coated
• Body/Heat Exchanger: Copper
• Element: 3 Brass Flange/Copper
• Pipe fittings: 3/4" NPT
• Activation flow rate: .25 gallon
• Operation Pressure: Min 25 PSI, Max 150
  
  Electrical Specifications:

Model	KW @ 240V	Req.Breaker	Voltage	Max Power	Wire Gauge
AH-27	27	125 AMP	208/220/240	112.5 AMPS	# 2/2
AH-24	24	100 AMP	208/220/240	100 AMPS	# 2/2
AH-21	21	100 AMP	208/220/240	87.5 AMPS	# 2/2
AH-18	18	80 AMP	208/220/240	75 AMPS	# 4/2
AH-16	16	70 AMP	208/220/240	66 AMPS	# 4/2

TEMPERATURE RISE CHART

The chart below illustrates the maximum flow rate and temperature rise that can be achieved for the different AH Models. Most people shower at a temperature of between 98F and 104F. The chart is based on a 240 volt input voltage and maximum flow rates are listed for various incoming water temperature levels. If your home or business has less than 240 volt power (208v), your maximum flow rate will be lower. Simply look up your incoming water temperature and desired flow rate to determine your model choice. Don't forget that incoming water temperature may change throughout the year depending on the season.

MODEL SELECTOR

AMHEAT05

The AH Series

AH27 / AH24 / AH21 SPECIFICATIONS

• Dimensions: 16” x 17” x 3.25”
• Shipping Weight: 16 lbs.
• Cover: Aluminum / Powder Coated
• Body/Heat Exchanger: Copper
• Element: 3 Brass Flange/Copper
• Pipe fittings: 3/4" NPT
• Activation flow rate: .25 gallon
• Operation Pressure: Min 25 PSI, Max 150

AH18 / AH16 / AH14 SPECIFICATIONS

• Dimensions: 16” x 13.5” x 3.25”
• Shipping Weight: 12 lbs.
• Cover: Aluminum / Powder Coated
• Body/Heat Exchanger: Copper
• Element: 3 Brass Flange/Copper
• Pipe fittings: 3/4" NPT
• Activation flow rate: .25 gallon
• Operation Pressure: Min 25 PSI, Max 150
  
  Electrical Specifications:

Model	KW @ 240V	Req.Breaker	Voltage	Max Power	Wire Gauge
AH-27	27	125 AMP	208/220/240	112.5 AMPS	# 2/2
AH-24	24	100 AMP	208/220/240	100 AMPS	# 2/2
AH-21	21	100 AMP	208/220/240	87.5 AMPS	# 2/2
AH-18	18	80 AMP	208/220/240	75 AMPS	# 4/2
AH-16	16	70 AMP	208/220/240	66 AMPS	# 4/2

TEMPERATURE RISE CHART

The chart below illustrates the maximum flow rate and temperature rise that can be achieved for the different AH Models. Most people shower at a temperature of between 98F and 104F. The chart is based on a 240 volt input voltage and maximum flow rates are listed for various incoming water temperature levels. If your home or business has less than 240 volt power (208v), your maximum flow rate will be lower. Simply look up your incoming water temperature and desired flow rate to determine your model choice. Don't forget that incoming water temperature may change throughout the year depending on the season.

MODEL SELECTOR

FLOWAIDE01

CASE PRICE ALERT!
BUY 6 OR MORE AND SAVE 10%.
Add To Cart For Price Savings.

AMHEAT10

The AH Series

AH27 / AH24 / AH21 SPECIFICATIONS

• Dimensions: 16” x 17” x 3.25”
• Shipping Weight: 16 lbs.
• Cover: Aluminum / Powder Coated
• Body/Heat Exchanger: Copper
• Element: 3 Brass Flange/Copper
• Pipe fittings: 3/4" NPT
• Activation flow rate: .25 gallon
• Operation Pressure: Min 25 PSI, Max 150

AH18 / AH16 / AH14 SPECIFICATIONS

• Dimensions: 16” x 13.5” x 3.25”
• Shipping Weight: 12 lbs.
• Cover: Aluminum / Powder Coated
• Body/Heat Exchanger: Copper
• Element: 3 Brass Flange/Copper
• Pipe fittings: 3/4" NPT
• Activation flow rate: .25 gallon
• Operation Pressure: Min 25 PSI, Max 150
  
  Electrical Specifications:

Model	KW @ 240V	Req.Breaker	Voltage	Max Power	Wire Gauge
AH-27	27	125 AMP	208/220/240	112.5 AMPS	# 2/2
AH-24	24	100 AMP	208/220/240	100 AMPS	# 2/2
AH-21	21	100 AMP	208/220/240	87.5 AMPS	# 2/2
AH-18	18	80 AMP	208/220/240	75 AMPS	# 4/2
AH-16	16	70 AMP	208/220/240	66 AMPS	# 4/2

TEMPERATURE RISE CHART

The chart below illustrates the maximum flow rate and temperature rise that can be achieved for the different AH Models. Most people shower at a temperature of between 98F and 104F. The chart is based on a 240 volt input voltage and maximum flow rates are listed for various incoming water temperature levels. If your home or business has less than 240 volt power (208v), your maximum flow rate will be lower. Simply look up your incoming water temperature and desired flow rate to determine your model choice. Don't forget that incoming water temperature may change throughout the year depending on the season.

MODEL SELECTOR