Takagi Tankless Water Heaters: Welcome To DiscountTankless.net

Takagi Tankless Water Heaters
Welcome To DiscountTankless.net:Takagi Tankless Water Heaters

TAKAGI01NG
Takagi Natural Gas Flash Tankless Water Heater Model T-K Jr NG
$648.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

This Model Does Not Require The T-BK01 Wall Mounting Bracket. The heater includes a factory wall mounting system.

At just twenty inches high, and weighing only thirty pounds, the T-K Jr. Natural Gas model is the most compact unit in the Takagi line.

Designed to produce endless hot water and radiant heating for smaller homes.

The T-K Jr. Natural Gas model uses the same innovative technology as the original Takagi units - only on an even smaller scale.

Can be installed indoors or outdoors

Wall Mount Bracket Comes Standard With This Model

Gas Input	Min. 19,500 Btu	Max. 140,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
Manifold Pressure	2.8" WC
Weight	30 lbs.
Dimensions	20" x 14" x 6"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V

Model T-K Jr NG (Natural Gas)

Click on the links below for more information:
(1) Specifications
(2) Installation Specifications
(3) Basic System
(4) Hydronic & Domestic Heating
(5) Hydronic Heating Only
(6) Radiant & Domestic Heating
(7) Radiant Heating Only
(8) With Recirculation Only
(9) With Storage Tank
(10) Installation Manual and Owners Guide
(11) Takagi Warranty Info & Registration

Click Here For Detailed Information About This Products Warranty.

TAKAGI01LP
Takagi Liquid Propane Flash Tankless Water Heater Model T-K Jr LP
$648.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

This Model Does Not Require The T-BK01 Wall Mounting Bracket. The heater includes a factory wall mounting system.

At just twenty inches high, and weighing only thirty pounds, the T-K Jr. LP model is the most compact unit in the Takagi line.

Designed to produce endless hot water and radiant heating for smaller homes.

The T-K Jr. LP model uses the same innovative technology as the original Takagi units - only on an even smaller scale.

Can be installed indoors or outdoors

Wall Mount Bracket Comes Standard With This Model

Gas Input	Min. 17,000 Btu	Max. 140,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 11" WC	Max. 14" WC
Manifold Pressure	3.2" WC
Weight	30 lbs.
Dimensions	20" x 14" x 6"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V

Model T-K Jr LP (Liquid Propane)

TAKAGI21NG
Takagi Natural Gas Flash Tankless Water Heater Model T-K3-NG
$986.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Tankless Water Heater T-K3-NG (Natural Gas)

Includes Wall Mount System.
(No Additional Purchase Required).

Picture Shown with OPTIONAL TK- TV 10 Direct Vent Kit. If using this heater in a direct vent application, you must order the Optional TK-TV 10 offered below. If using open air combustion there is no need to purchase this item.

New Features

Easy-Link Multi-System:

LINK UP TO 4 T-K3 HEATERS TOGETHER FOR A REMARKABLE 28 GALLONS PER MINUTE

Maximum 4 units (without the need for a multi-unit controller like the TM-RE20)
TM-RE10 is the remote control for the T-K3. It is optional and not necessary for the multi unit system
Easy-Link wire comes with each heater

8 temperature settings with dip switches

104�F, 113�F, 122�F(default), 131�F, 140�F, 158�F, 176�F and 185�F

Air-Fuel Ratio Rod

Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to -22 �F in a wind-free environment

Gas Input	Min. 11,000 Btu	Max. 199,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
Manifold Pressure	2.5" WC
Weight	40 lbs.
Dimensions	20.5" x 13.8" x 8.5"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V
Water Flow Rate	Min. 0.5 GPM Max 7GPM
Outlet Water Temperature	Min. 104� F--Max 185� F

Click on the links below for more information:

(1) Installation Manual and Owners Guide & Specs
(2) Specification Side A
(3) Specification Side B(2) Basic System
(4) Hydronic & Domestic Heating
(5) Hydronic Heating Only
(6) Radiant & Domestic Heating
(7) Radiant Heating Only
(8) With Recirculation Only
(9) With Storage Tank
(10) Takagi Warranty Info & Registration

Click Here For Detailed Information About This Products Warranty.

TAKAGI21LP
Takagi Liquid Propane Flash Tankless Water Heater Model T-K3-LP
$986.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Tankless Water Heater T-K3-LP (Liquid Propane)

Includes Wall Mount System.
(No Additional Purchase Required).

New Features

Easy-Link Multi-System:

LINK UP TO 4 T-K3 HEATERS TOGETHER FOR A REMARKABLE 28 GALLONS PER MINUTE

Maximum 4 units (without the need for a multi-unit controller like the TM-RE20)
TM-RE10 is the remote control for the T-K3. It is optional and not necessary for the multi unit system
Easy-Link wire comes with each heater

8 temperature settings with dip switches

104�F, 113�F, 122�F(default), 131�F, 140�F, 158�F, 176�F and 185�F

Air-Fuel Ratio Rod

Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to -22 �F in a wind-free environment

Gas Input	Min. 11,000 Btu	Max. 199,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 8" WC	Max. 14" WC
Manifold Pressure	4.4" WC
Weight	40 lbs.
Dimensions	20.5" x 13.8" x 8.5"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V
Water Flow Rate	Min. 0.5 GPM Max 7GPM
Outlet Water Temperature	Min. 104� F--Max 185� F

Click on the links below for more information:

TAKAGI23NG
Takagi Natural Gas Flash Tankless Water Heater Outdoor Model T-K3-OS-NG
$822.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Tankless Water Heater T-K3-OS-NG

Includes Wall Mount System.
(No Additional Purchase Required).

4 temperature settings with dip switches

113�F, 122�F(default), 140�F, 167�F

Air-Fuel Ratio Rod

Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to 5�F in a wind-free environment

Gas Input	Min. 11,000 Btu	Max. 190,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
Manifold Pressure	2.8" WC
Weight	40 lbs.
Dimensions	20.5" x 13.8" x 8.5"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V
Water Flow Rate	Min. 0.5 GPM Max 7GPM
Outlet Water Temperature	Min. 104� F--Max 185� F

*This model will not accommodate the Easy-Link Multi-System. For Easy-Link Multi-System applications, you would use the T-K3 indoor unit along the TK-TV04 Outside Ventilating Cap.

Click on the links below for more information:

(1) Hydronic & Domestic Heating
(2) Hydronic Heating Only
(3) Radiant & Domestic Heating
(4) Radiant Heating Only
(5) With Recirculation Only
(6) With Storage Tank
(7) Takagi Warranty Info & Registration
(8) Product Manual
(9) Product Specifications

For recessed installation we offer the option for the RB-02 Recess Box & PC-01 Pipe Cover. Click here for the RB-02 Recess Box spec sheet & installation manual.

Click Here For Detailed Information About This Products Warranty.

TAKAGI23LP
Takagi Liquid Propane lash Tankless Water Heater Outdoor Model T-K3-OS-LP
$822.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Tankless Water Heater T-K3-OS-LP

Includes Wall Mount System.
(No Additional Purchase Required).

4 temperature settings with dip switches

113�F, 122�F(default), 140�F, 167�F

Air-Fuel Ratio Rod

Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to 5�F in a wind-free environment

Gas Input	Min. 11,000 Btu	Max. 190,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 8" WC	Max. 13.5" WC
Manifold Pressure	3.1" WC
Weight	40 lbs.
Dimensions	20.5" x 13.8" x 8.5"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V
Water Flow Rate	Min. 0.5 GPM Max 7GPM
Outlet Water Temperature	Min. 104� F--Max 185� F

*This model will not accommodate the Easy-Link Multi-System. For Easy-Link Multi-System applications, you would use the T-K3 indoor unit along the TK-TV04 Outside Ventilating Cap.

Click on the links below for more information:

For recessed installation we offer the option below for the RB-02 Recess Box & PC-01 Pipe Cover. Click here for the RB-02 Recess Box spec sheet & Installation manual.

Click Here For Detailed Information About This Products Warranty.

TAKAGI22LP
Takagi Mobius Liquid Propane Tankless Water Heater Model T-M199-LP
$1,396.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

AVAILABLE IN LP GAS(LIQUID PROPANE) ONLY

Takagi T-M199
Fully modulating gas fired tankless on demand water heater with sealed combustion (optional) power vented flue. Rate for indoor/outdoor use to supply hot water to; domestic hot water systems (direct or indirect using water storage tank applications) with or without recirculation system piping, hydronic heating systems, radiant floor heating, and combined domestic water and heating water systems.

Saftey Features

Built-in Freeze Protection

Manual Reset Hi Limit (Set at 194 F)

Overheat Cut Off Fuse

Inlet/Outlet Thermistors for Constant Temperature Monitoring

Flue Backdraft Pressure Switch

GFI POwer Supply Connection

Venting and Combustion

4in Category III Stainless Steel

Vertical or Horizontal Installation

35ft Max Length, 3 Elbows max (90 degree elbows = 5ft equivalent length)

Power Vent

Electronic Ignition

52 dB Fan Noise Level at Max Speed

Remote Controller

400ft Max Distance From Heater

Non Polarized 18 Guage Control Wiring

Takagi Mobius Tankless Water Heater
Model T-M199-LP

LPG Input	Min. 25,000 Btu	Max.199,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
LP Gas Pressure Inlet	Min. 11" WC	Max. 14" WC
Manifold Pressure	Natural 2.2" WC	Propane 2.7" WC
Weight	40 lbs
Dimensions	23.6 H x 18.5 W
Ignition	Electronic
Electrical Supply	120 volt

Click for product specifications.
Click for owners manual.

Click Here For Detailed Information About This Products Warranty.

TAKAGI06LP
Takagi Liquid Propane Flash Tankless Water Heater Model TK-D20-LP
$940.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

AVAILABLE IN LP GAS (LIQUID PROPANE) ONLY - WHILE SUPPLIES LAST

please note this items requires wall mount brackets to hang on wall & we no longer have any in stock

T-KD20 uses a "Direct Vent System". With a three-inch round combustible air intake vent and four-inch round exhaust power vent.

FLASH T-KD20 is designed to work when indoor combustion air is not available.

Offering the perfect system for climate -controlled environments such as colder areas.

Plus if your not sure which application of indoor venting your going to use, this again is the perfect choice because all of your make up air options are covered!

Can only be installed outdoors if you use 2 TKTV-04 Vent Caps.

Takagi Tankless Water Heater
Model TK-D20-LP

LPG Input	Min. 19,000 Btu	Max. 175,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
LP Gas Pressure Inlet	Min. 11" WC	Max. 14" WC
Manifold Pressure	Natural 2.3" WC	Propane 2.5 " WC
Weight	60 lbs.
Dimensions	24.5" x 16.5" x 8.3"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V

Model TDK-20-LP

Click on the links below for more information:

The following links require Adobe Acrobat.
To download the latest version, click here!

(1) Specifications
(2) Installation Specifications
(3) Basic System
(4) Hydronic & Domestic Heating
(5) Hydronic Heating Only
(6) Radiant & Domestic Heating
(7) Radiant Heating Only
(8) With Recirculation Only
(9) With Storage Tank
(10) Installation Manual and Owners Guide
(11) Takagi Warranty Info & Registration

Click Here For Detailed Information About This Products Warranty.

TAKAGI24NG
Takagi Commercial Natural Gas Flash Tankless Water Heater Model T-K3 PRO-NG
$1,189.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Commercial Tankless Water Heater
T-K3 PRO-NG

Includes Wall Mount System.
(No Additional Purchase Required).

New Features

The T-K3-PRO-NG is ideal for light-commercial applications including small restaurants and beauty salons.

Utilizing HRS35 copper alloy for the heat exchanger tubing, the T-K3-PRO-NG is also suited for heavier-residential usages such as space-heating and domestic recirculation systems.

In addition to the added durability, the T-K3-PRO-NG incorporates all the features of the popular T-K3 residential model.

Easy-Link Multi-System:

LINK UP TO 4 T-K3 HEATERS TOGETHER FOR A REMARKABLE 28 GALLONS PER MINUTE

Maximum 4 units (without the need for a multi-unit controller like the TM-RE20)
TM-RE30 is the remote control for the T-K3. It is optional and not necessary for the multi unit system
Easy-Link wire comes with each heater

8 temperature settings with dip switches

104�F, 113�F, 122�F(default), 131�F, 140�F, 158�F, 176�F and 185�F

Air-Fuel Ratio Rod

Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to -22 �F in a wind-free environment

Gas Input Min. 11,000 Btu Max. 199,000 Btu

Gas Connection 3/4" NPT

Water Connections 3/4" NPT

Water Pressure Min. 15 psi Max. 150 psi

Gas Pressure Inlet Min. 5" WC Max. 10.5" WC

Manifold Pressure 2.5" WC

Weight 40 lbs.

Dimensions 25.3" x 24.8" x 11.8"

Ignition Electronic Ignition

Electrical Supply AC 120 V

Water Flow Rate Min. 0.5 GPM Max 7GPM

Outlet Water Temperature Min. 104� F--Max 185� F

(1) Installation Manual and Owners Guide & Specs
(2) Specifications
(4) Hydronic & Domestic Heating
(5) Hydronic Heating Only
(6) Radiant & Domestic Heating
(7) Radiant Heating Only
(8) With Recirculation Only
(9) With Storage Tank

Click Here For Detailed Information About This Products Warranty.

TAKAGI24LP
Takagi Commercial Liquid Propane Flash Tankless Water Heater Model T-K3 PRO-LP
$1,189.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Commercial Tankless Water Heater
T-K3 PRO-LP

Includes Wall Mount System.
(No Additional Purchase Required).

New Features

The T-K3-PRO-LP is ideal for light-commercial applications including small restaurants and beauty salons.

Utilizing HRS35 copper alloy for the heat exchanger tubing, the T-K3-PRO-LP is also suited for heavier-residential usages such as space-heating and domestic recirculation systems.

In addition to the added durability, the T-K3-PRO-LP incorporates all the features of the popular T-K3 residential model.

Easy-Link Multi-System:

LINK UP TO 4 T-K3 HEATERS TOGETHER FOR A REMARKABLE 28 GALLONS PER MINUTE

Maximum 4 units (without the need for a multi-unit controller like the TM-RE20)
TM-RE30 is the remote control for the T-K3. It is optional and not necessary for the multi unit system
Easy-Link wire comes with each heater

8 temperature settings with dip switches

104�F, 113�F, 122�F(default), 131�F, 140�F, 158�F, 176�F and 185�F

Air-Fuel Ratio Rod

Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to -22 �F in a wind-free environment

Gas Input Min. 11,000 Btu Max. 199,000 Btu

Gas Connection 3/4" NPT

Water Connections 3/4" NPT

Water Pressure Min. 15 psi Max. 150 psi

Gas Pressure Inlet Min. 8" WC Max. 14" WC

Manifold Pressure 4.4" WC

Weight 40 lbs.

Dimensions 25.3" x 24.8" x 11.8"

Ignition Electronic Ignition

Electrical Supply AC 120 V

Water Flow Rate Min. 0.5 GPM Max 7GPM

Outlet Water Temperature Min. 104� F--Max 185� F

(1) Installation Manual and Owners Guide & Specs
(2) Specifications
(4) Hydronic & Domestic Heating
(5) Hydronic Heating Only
(6) Radiant & Domestic Heating
(7) Radiant Heating Only
(8) With Recirculation Only
(9) With Storage Tank

Click Here For Detailed Information About This Products Warranty.

TAKAGI19NG
Takagi Natural Gas Flash Tankless Water Heater T-H1-NG
$2,712.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

AVAILABLE IN NATURAL GAS ONLY - WHILE SUPPLIES LAST

This Model Does Not Require The The T-BK01 Wall Mounting Bracket. The heater includes a factory wall mounting system.

With 95%* energy efficiency, the T-H1 is the most technologically advanced water heater on the instantaneous water heater market today.

The new T-H1 is equipped with a Pre-Heating system and Built in Neutralizer that provides greater efficiency and reliability. Discover the future, discover the Flash T-H1.

Designed for commercial and heavy residential use.

Flow Rate:0.75 - 10.2 GPM 199,000 Btu's

Optional accessories are TH-TV08 Outside Vent Kit

T-H1 Direct Vent Kits

TK-REO1 Remote Control

Must ship Motor Freight only

Click Here For The Product Manual

Click Here For Detailed Information About This Products Warranty.

TAKAGI25NG
Takagi Mobius Natural Gas Tankless Water Heater Model T-M32-NG
$1,868.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Commercial Tankless Water Heater TM32-NG

The NEW T-M32 model was specifically designed for heavy-duty commercial applications. The T-M32 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. Try the new T-M32 or T-M32 ASME model and see why Takagi offers the most durable and best quality commercial tankless heaters on the market!

A unique feature of the T-M32 is its flexibility in large use applications such as big homes, hotels and motels, apartments and other commercial structures.

240,000 BTU/U, up to 9 GPM (Max)

The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit.

Easy-link capability up to 4 units. You may connect up to 20 units and generate over 180 GPM using a multi-controller unit.

Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder than the standard copper, making it much more resilient against erosion and leaks.

Offers precise control of the water valves.

8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications.

7-segment LED for error codes: Remote controller is not required to pinpoint problems.

Ignition indicators: indicates which burner is fired up at the moment.

Utilizes the air-fuel ratio rod for added safety.

The drum thickness has been increased 25% for greater heat exchanger performance and to be more resistant to thermal stress.

Increase in fin pitch: Fins are more "spread out" which improves the durability of the heat exchanger. More space in-between the fins reduces build-up. Higher temperatures at the top of heat exchanger reduces condensation.

Click Here To Buy The Required Relief Valve

Takagi Mobius Tankless Water Heater
Model T-M32

Gas Input	Min.24,000 Btu	Max. 240,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
Manifold Pressure	2.2" WC
Weight	56 lbs.
Dimensions	23.6" x 18.5" x 8. 9"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V

Get your Isolation valve kit for only $69.00 with the purchase of this heater.

Click on the links below for more information:

The following links require Adobe Acrobat.
To download the latest version, click here!

Click Here For Detailed Information About This Products Warranty.

TAKAGI25LP
Takagi Mobius Liquid Propane Tankless Water Heater Model T-M32-LP
$1,868.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Commercial Tankless Water Heater TM32-LP

A unique feature of the T-M32 is its flexibility in large use applications such as big homes, hotels and motels, apartments and other commercial structures.

240,000 BTU/U, up to 9 GPM (Max)

The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit.

Easy-link capability up to 4 units. You may connect up to 20 units and generate over 180 GPM using a multi-controller unit.

Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder than the standard copper, making it much more resilient against erosion and leaks.

Offers precise control of the water valves.

8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications.

7-segment LED for error codes: Remote controller is not required to pinpoint problems.

Ignition indicators: indicates which burner is fired up at the moment.

Utilizes the air-fuel ratio rod for added safety.

The drum thickness has been increased 25% for greater heat exchanger performance and to be more resistant to thermal stress.

Click Here To Buy The Required Relief Valve

Takagi Mobius Tankless Water Heater
Model T-M32

LPG Input	Min. 24,000 Btu	Max. 240,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 8" WC	Max. 14" WC
Manifold Pressure	2.7" WC
Weight	56 lbs.
Dimensions	23.6" x 18.5" x 8. 9"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V

Get your Isolation valve kit for only $69.00 with the purchase of this heater.

Click on the links below for more information:

The following links require Adobe Acrobat.
To download the latest version, click here!

Click Here For Detailed Information About This Products Warranty.

TAKAGI26NG
Takagi Mobius Natural Gas Heavy Duty Commercial Tankless Water Heater Model T-M32ASME-NG
$2,389.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Commercial Tankless Water Heater TM32ASME-NG

The NEW T-M32ASME model was specifically designed for heavy-duty commercial applications. The T-M32 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. Try the new T-M32 or T-M32 ASME model and see why Takagi offers the most durable and best quality commercial tankless heaters on the market!

A unique feature of the T-M32ASME is its flexibility in large use applications such as big homes, hotels and motels, apartments and other commercial structures.

ASME Certified

240,000 BTU/U, up to 9 GPM (Max)

The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit.

Easy-link capability up to 4 units. You may connect up to 20 units and generate over 180 GPM using a multi-controller unit.

Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder than the standard copper, making it much more resilient against erosion and leaks.

Offers precise control of the water valves.

8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications.

7-segment LED for error codes: Remote controller is not required to pinpoint problems.

Ignition indicators: indicates which burner is fired up at the moment.

Utilizes the air-fuel ratio rod for added safety.

The drum thickness has been increased 25% for greater heat exchanger performance and to be more resistant to thermal stress.

Click Here To Buy The Required Relief Valve

Takagi Mobius Tankless Water Heater
Model T-M32

Gas Input	Min.24,000 Btu	Max. 240,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
Manifold Pressure	2.2" WC
Weight	56 lbs.
Dimensions	23.6" x 18.5" x 8. 9"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V

Get your Isolation valve kit for only $69.00 with the purchase of this heater.

Click on the links below for more information:

The following links require Adobe Acrobat.
To download the latest version, click here!

Click Here For Detailed Information About This Products Warranty.

TAKAGI26LP
Takagi Mobius Liquid Propane Heavy Duty Commercial Tankless Water Heater Model T-M32ASME-LP
$2,389.00
Additional Info

FREE GROUND SHIPPING ON THIS TANKLESS WATER HEATER!

Takagi Commercial Tankless Water Heater TM32AMSE-LP

A unique feature of the T-M32ASME is its flexibility in large use applications such as big homes, hotels and motels, apartments and other commercial structures.

ASME Certified

240,000 BTU/U, up to 9 GPM (Max)

The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit.

Easy-link capability up to 4 units. You may connect up to 20 units and generate over 180 GPM using a multi-controller unit.

Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder than the standard copper, making it much more resilient against erosion and leaks.

Offers precise control of the water valves.

8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications.

7-segment LED for error codes: Remote controller is not required to pinpoint problems.

Ignition indicators: indicates which burner is fired up at the moment.

Utilizes the air-fuel ratio rod for added safety.

The drum thickness has been increased 25% for greater heat exchanger performance and to be more resistant to thermal stress.

Click Here To Buy The Required Relief Valve

Takagi Mobius Tankless Water Heater
Model T-M32

Natural Gas Input	Min.24,000 Btu	Max. 240,000 Btu
LPG Input	Min. 24,000 Btu	Max. 240,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Natural Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
LP Gas Pressure Inlet	Min. 8 " WC	Max. 14" WC
Manifold Pressure	Natural 2.2" WC	Propane 2.7" WC
Weight	56 lbs.
Dimensions	23.6" x 18.5" x8. 9"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V

Get your Isolation valve kit for only $69.00 with the purchase of this heater.

Click on the links below for more information:

The following links require Adobe Acrobat.
To download the latest version, click here!

Click Here For Detailed Information About This Products Warranty.

Welcome To DiscountTankless.net: Takagi Tankless Water Heaters

Untitled Document

Contact Us: Click Here